Today, I’m going to show you how to replace the key fob battery for a 2007-2010 Honda Pilot. The key fob part number is N5F-A05TAA.
To open the key fob, you’ll need a small Phillips screwdriver to remove the screw on the back. Then, use a small flat-head screwdriver to twist and open the back panel.
Once opened, use the flat-head screwdriver to remove the inner piece and access the battery. The battery model used is CR1616.
Replace the old battery with a new one by sliding it in with the plus side down. Snap the key fob back together and reinsert the screw to tighten it.
If you need a replacement battery or key fob remote, you can find it here or contact us at 402-671-5100.
Which Honda Pilot models is the key fob compatible with?
The key fob is compatible with the 2007 through 2010 Honda Pilot.
What is the part number for this key fob?
The part number for this key fob is N5F-A06TAA.
How do I replace the key fob battery?
To replace the key fob battery, follow these steps: 1. Use a small Phillips screwdriver to remove the small screw on the backside of the key fob. 2. Insert a small flat-head screwdriver into the notch on the side of the key fob and twist to open the back panel. 3. Use the screwdriver to pop out the inner piece and then the back of the key fob. 4. Replace the CR1616 battery with the plus side facing down. 5. Snap the key fob back together and replace the screw.
Where can I order a replacement battery or key fob remote?
You can order a replacement battery or key fob remote by clicking on the link in the description below, visiting our website at keylessentryremotefob.com, or calling us at 402-671-5100.