2013 Ford Escape Cabin Air Filter: Detailed Guide on Location, Replacement, and Reassembly

If you’re concerned about the quality of the air inside your car, changing the cabin filter can make a big difference. The cabin filter helps to keep airborne contaminants out of your car, providing you with clean, fresh air. Here’s a step-by-step guide to help you replace the cabin filter in your car.

Before starting, you will need a new cabin filter for your vehicle. You can order the correct filter for your car from Filterheads.com to ensure a proper fit.

Step 1: Locate the Cabin Filter

The cabin filter is typically located on the left corner of the footwell, behind the glovebox. To access it, you will need to remove the securing tabs and the bottom panel of the glovebox assembly.

Step 2: Remove the Old Filter

Once you have access to the filter housing, remove the screw on the bottom of the filter housing cover using a 7/64th hex driver. Then, pinch the sides at the tabs and pull down to remove the securing tabs from their catch. Take out the old filter from the housing and clean out any debris inside.

Step 3: Install the New Filter

Install your new cabin filter into the housing with the airflow indicating arrow pointing towards the back of the car. Ensure that the hard sides of the filter are positioned on the top and bottom with the pleats placed vertically. You may need to rotate the filter to fit properly.

Step 4: Reassemble the Housing

Slide the housing cover back into position and press it to lock it into place. Reinstall the footwell ceiling by aligning the vent system with their openings. Press to lock the tabs into their catch.

It is recommended to replace your cabin filter every 15,000 miles or at least once a year for optimal performance. Be sure to consult your vehicle owner’s manual for specific recommendations and specifications related to your car model.

By following these simple steps, you can ensure that the air inside your car remains clean and free from contaminants. Make this a part of your regular car maintenance routine to enjoy fresh, clean air during your drives.

Don’t let airborne contaminants affect the air quality in your car – change your cabin filter today for a breath of fresh air.

Where is the cabin filter located?

The cabin filter is located on the left corner of the footwell.

How do I remove the old filter?

Pinch the sides at the tabs and pull down to remove the securing tabs from their catch, then remove the old filter from the housing and clean out any debris inside.

How do I install the new filter?

Install your new AQ1211 filter into the housing with its airflow indicating arrow pointing towards the back of the car. Ensure the hard sides are on the top and bottom with the pleats vertical.

How often should the cabin filter be replaced?

Recommended replacement every 15,000 miles or one year. Refer to your vehicle owner’s manual for specifications.

How do I reinstall the housing cover and footwell ceiling?

Slide the housing cover into position and press to lock it into place. Reinstall the housing door screw. Reinstall the footwell ceiling by aligning the vent system with their openings and press to lock the tabs into their catch.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top