In this article, we will discuss the steps to change the key battery in an older model of Honda Civic key fob used from 2006 to 2013. If you own this particular model, this guide will assist you in replacing the key battery effectively.
The first step is to flip over the key fob and locate a small screw at the base of the fob. You will need a precision screwdriver set to remove this screw. Once the screw is removed, set it aside and proceed to the next step. In the middle of the fob, there is a notch to place a small flat-head screwdriver. By twisting it gently, the base of the key will start to loosen, allowing you to pull it apart.
Upon separating the key, you will find the internal piece containing the battery that needs to be changed. Another notch can be found to separate this piece into two. Carefully popping it off will give you access to the battery. The battery required for this key is a CR1616 3-volt coin battery. Once you have the new battery, place it in by pressing it into place and ensure it is securely in position.
After changing the battery, reassemble the key by placing the internal piece back in and then the outer shell, ensuring everything fits snugly. Finally, put the screw back in place to complete the process.
By following these simple steps, you can easily change the key battery for the older Honda Civic model from 2006 to 2013. Now that you know the steps and the type of battery required, you can maintain a properly functioning key fob for your vehicle.
What do I need to change the key battery in a Honda Civic?
To change the key battery in a Honda Civic (2006-2013), you will need a precision screwdriver set, specifically a flat-head screwdriver, and a CR1616 3-volt coin battery.
How do I access the key battery in a Honda Civic fob?
First, unscrew the small screw at the base of the fob. Then, using a flat-head screwdriver, insert it into the notch in the middle and twist to release the base. Further separate the pieces using a screwdriver in the upper right notch, and access the battery.
How do I remove the old key battery and install the new one?
To remove the old battery, use a screwdriver to pop it out from underneath. Then, insert the new CR1616 battery by pressing it into place. Reassemble the fob, ensuring all parts are securely back in place.
Any additional tips for changing the key battery?
Make sure to link to a precision screwdriver set for convenience in the process. When reassembling, ensure the Ridge of the shell goes in first before closing it and securing the screw.