If you own a Hyundai Ioniq from the 2011 to 2016 models, at some point, you might need to remove and replace the battery. In this guide, we will walk you through the process step by step to ensure you can do this task with ease.
First and foremost, safety is essential when working with car batteries. Always remember to remove the negative terminal first using a 10mm socket. This is crucial to prevent any potential hazards. After the negative terminal, remove the positive post as well using the same 10mm socket.
Next, you’ll need to locate and remove the bracket holding the battery in place. Use a 12mm socket with an extension to remove the bolt. Once the bracket is off, you can then carefully pull the battery out of its place, making sure to keep the area clean and free of any debris.
When installing the new battery, make sure to insert it correctly and secure it with the bracket. Tighten the bolts to ensure the battery is stable and won’t move around while driving. After that, reconnect the positive terminal followed by the negative terminal, always in reverse order.
It’s also a good idea to apply a small amount of battery corrosion preventative spray to the posts to keep them secure. This oil-based spray will help prevent any future issues with the battery.
Finally, check out our video on how to recharge the battery with solar light only for more tips and tricks.
Thank you for reading and see you on the next one!
How do I remove and replace the battery on a Hyundai Santa Fe from 2011 to 2016?
To remove and replace the battery on a Hyundai Santa Fe from 2011 to 2016, you will need to follow these steps: 1. Start by removing the negative post first to avoid any potential damage to the computer. 2. Then proceed to remove the positive post as well using a 10 millimeter socket. 3. Pull out the soft insulation and locate the bolt holding the battery bracket in place. It can usually be removed with a 12 millimeter socket with extension. 4. Once the bracket is removed, carefully pull out the old battery. 5. Install the new battery, ensuring the posts are kept out of the way. 6. Reinstall the bracket and secure it in place followed by connecting the positive post first and then the negative post. 7. It’s recommended to apply a battery corrosion preventative spray on the posts to prevent any issues. For a visual demonstration and information on recharging the battery with solar light, refer to our YouTube channel.