If you own a 2010-2016 Hyundai Elantra with a 1.8-liter engine, checking the transmission fluid is essential for its maintenance. Although this model lacks a dipstick tube, the process is simple and can be done by any regular car owner.
Below is a step-by-step guide to help you check the transmission fluid on your Hyundai Elantra:
Finding the Fill Location
Locate the fill point for the transmission fluid, which is a 3/8 square head situated in a tight space. It is recommended to use a long 12-inch extension to access the fill point easily.
Accessing the Drain Plug
To access the drain plug, you will need to remove the shield underneath the vehicle. This involves unscrewing push pin style clips and two 10mm head bolts on each side of the shield. After removing the shield, you can easily spot the drain plug, which has a 3/8 drive square in it.
Filling the Fluid
While the car is running, fill the transmission fluid through the fill point. Once the fluid starts to drip out of a particular plug, it indicates that the transmission is adequately filled. Use the recommended Hyundai transmission fluid or a suitable full synthetic multi-vehicle automatic transmission fluid to refill the transmission.
Concluding the Process
Place a collection box under the drain plug to catch any excess fluid. Ensure to tighten the plug and then turn off the engine. On average, a drain and fill process for the Hyundai Elantra transmission will require approximately 1 gallon of fluid.
Following these steps will ensure that your Hyundai Elantra’s transmission fluid is at the right level, maintaining the overall health and performance of your vehicle.
How do I check the transmission fluid on a 2010-2016 Hyundai Elantra?
Checking the transmission fluid on a 2010-2016 Hyundai Elantra with a 1.8 liter engine requires locating the fill area, which is accessible with a 3/8 square head tool. The fluid level can be checked by removing a specific plug while the car is running and filling it with fluid until it starts to drip out. It’s recommended to use a long funnel and the appropriate Hyundai transmission fluid or a suitable full synthetic multi-vehicle automatic transmission fluid.
What tools are needed to check the transmission fluid?
To check the transmission fluid, you will need a 3/8 square head tool for the fill area and a long funnel to fill the fluid. Additionally, having a container to collect any dripping fluid and the appropriate transmission fluid is essential.
How much fluid is needed for a drain and fill of the transmission?
For a drain and fill of the transmission, approximately 1 gallon of fluid is needed. It’s important to fill the fluid until it starts to drip out, then replace the plug and shut off the engine.