If you want to bring an end to airborne contaminants in your car, a new cabin filter from Filterheads.com can help.
The cabin filter is located behind the glovebox, and here’s how you can replace it:
- Open the glovebox.
- Unhook the dampener arm.
- Push in on the sides of the glovebox to release the stops and lower the glovebox.
- Pinch the tabs of the filter housing and pull outwards to remove it.
- Remove the old filter from the housing and clean out any debris inside.
- Install your new AQ1144 filter into the housing with its airflow indicating arrow pointing down.
- Reinstall the housing cover.
- Partially close the glovebox so that the top tab slides in front.
- Install the dampener arm.
- Close the glovebox.
By following these steps, you can ensure that your car’s cabin filter is replaced properly, helping to keep the air inside your car clean and free from contaminants.
Where is the cabin filter located?
The cabin filter is located behind the glovebox.
How do I replace the cabin filter?
1. Open the glovebox. 2. Unhook the dampener arm. 3. Push in on the sides of the glovebox to release the stops and lower the glovebox. 4. Pinch the tabs of the filter housing and pull outwards to remove it. 5. Remove the old filter from the housing and clean out any debris inside. 6. Install your new AQ1144 filter into the housing with its airflow indicating arrow pointing down. 7. Reinstall the housing cover. 8. Partially close the glovebox so that the top tab slides in front. 9. Install the dampener arm. 10. Close the glovebox.