If you’re looking to work on a Hyundai Sonata 2011 through 2014, particularly the right front, this guide will help you navigate through the process. From removing the door panel to replacing the regulator, the following steps will ensure you are equipped with the knowledge to tackle this task.
Tools Required:
- Phillips screwdriver
- Seven-millimeter socket
- WD-40 lubricant
- Torx bolts
- Eight-millimeter socket
- Ten-millimeter socket
Step 1: Removing the Door Panel
Start by removing the screws behind the plastic plate and in the armrest of the door panel. Then, carefully pull the panel to release it, detaching the wiring harness connected to the switch and the plastic bracket.
Step 2: Accessing the Regulator
To access the regulator, you will need to remove the latch and the outside handle, which involves additional steps such as removing the side view mirror cover and the speaker.
Step 3: Replacing the Regulator
Undo the bolts and cables, and apply a light spray of WD-40 to the channels for smoother operation. Ensure you have the correct replacement regulator before proceeding further.
Step 4: Reassembling the Door Panel
Reattach the latch assembly, handle, speaker, black plastic bracket, and wiring harnesses. Once everything is secured, align and reattach the door panel, making sure all components are properly in place.
Step 5: Testing the Operation
After completing the process, test the window operation to ensure everything is functioning smoothly without any issues.
Following these steps should help you successfully remove and replace a Hyundai Sonata door panel. As always, ensure you have the necessary tools and take your time to avoid any damage or mishaps during the process.
What type of car are you working on?
The video demonstrates working on a Hyundai Sonata 2011 through 2014.
What tools are required to remove the door panel?
The tools required are Phillips screwdriver, 7mm and 10mm bolts, Torx screwdriver, and WD-40.
Do you need to unplug the airbag sensor?
It is mentioned that unplugging the airbag sensor may cause a problem, so it’s better to leave it plugged in.
Where can I find more information?
For more information, the creator mentioned their website upanddownmainstreet.com, and encourages viewers to like the video if they found it helpful.