If you want to put an end to airborne contaminants in your car, replacing the cabin filter is a simple yet effective solution. Here’s a step-by-step guide to help you with the process:
- Locate the cabin filter, which is typically situated in the left corner of the footwell.
- Pinch the sides at the tabs and pull down to remove the securing tabs from their catch.
- Next, remove the bottom panel from the glovebox assembly.
- The filter housing cover will have a screw on the bottom that requires a T20 Torx driver to remove.
- Pinch the tabs of the filter housing and pull outwards to remove it.
- Take out the old filter from the housing and clean out any debris inside.
- Install the new filter into the housing with its airflow indicating arrow pointing towards the back of the car. You may find it easier to rotate the filter as needed, but ensure that the hard sides are on the top and bottom with the pleats vertical.
- Make sure to visit Filterheads.com to order the right filter for your car model to ensure a proper fit.
- Slide the housing cover into position and press to lock it in place.
- Reinstall the housing door screw and the footwell panel.
- Finally, press up on the tabs to secure them on the screws.
By following these simple steps, you can easily replace the cabin filter in your car, ensuring cleaner and healthier air inside your vehicle.