2018 Ford Escape Cabin Air Filter: Comprehensive Replacement Guide

If you want to reduce airborne contaminants in your car, a new cabin filter could be the solution you are looking for. Follow these easy steps to change the cabin filter:

  1. Locate the cabin filter, which is typically located on the left corner of the footwell.
  2. Pinch the sides at the tabs and pull down to remove the securing tabs from their catch.
  3. Remove the bottom panel from the glovebox assembly to access the filter housing cover.
  4. Use a T20 Torx driver to remove the screw on the bottom of the filter housing cover.
  5. Pinch the tabs of the filter housing and pull outwards to remove it. Then take out the old filter from the housing and clean out any debris inside.
  6. Install the new AQ1211 filter into the housing with its airflow indicating arrow pointing towards the back of the car. It may be easier to pinch the sides down during installation. Make sure the hard sides of the filter are on the top and bottom with the pleats vertical.
  7. Slide the housing cover into position and press to lock it into place. Reinstall the housing door screw and footwell panel.
  8. Press up on the tabs to secure them on the screws. Your car’s cabin filter is now successfully changed!

Visit Filterheads.com to order your filter and ensure that it fits perfectly in your car.

Where is the cabin filter located?

The cabin filter is located on the left corner of the footwell.

How do I remove and replace the cabin filter?

To remove and replace the cabin filter, pinch the sides at the tabs and pull down to remove the securing tabs from their catch. Then, remove the bottom panel from the glovebox assembly. Next, remove the screw from the bottom of the filter housing cover using a T20 Torx driver. Pinch the tabs of the filter housing and pull outwards to remove it. After that, remove the old filter from the housing and clean out any debris inside. Install the new filter into the housing with its airflow indicating arrow pointing towards the back of the car. Finally, slide the housing cover into position and press to lock it into place.

Where can I order the new cabin filter?

You can visit Filterheads.com to order your filter and ensure that it fits.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top