When it comes to changing a headlight bulb on a 2014 Jeep Grand Cherokee, there are different methods out there. However, going through the porthole under the fender well, as seen in some videos, may not be the most effective way. It can be a waste of time since accessing the bulb from there is quite challenging.
An alternative approach is to go in through the top by pulling the ECU and pushing it off to the side. This method provides more room to work and makes the task less complicated.
The speaker found that the bulb was especially tight and even with gloves on, they could not unseat it from the rubber o-ring. To resolve this, they used a small vise grip to take the cover off and gain better access to the bulb. By poking around with the vise grip, they were able to grab onto the bulb and unseat it. While this method worked for them, they acknowledged that others may have better luck and might not need to use this tool.
In summary, the advice for changing the headlight bulb on a 2014 Jeep Grand Cherokee is to avoid the porthole under the fender well and instead go in through the top by moving the ECU, which provides more working space. If the bulb is particularly tight, using a small vise grip may be helpful in unseating it from the rubber o-ring.
For more details and a visual demonstration, the speaker recommends referring to other videos that may provide a step-by-step guide for this process.
Hopefully, this advice will assist you in successfully changing the headlight bulb in your 2014 Jeep Grand Cherokee.
How do I change a headlight bulb on a 2014 Jeep Grand Cherokee?
Avoid going in through the porthole under the fender well, as it is a waste of time. Instead, I recommend going in through the top and pulling the ECU to create more room to work. If the bulb is tight, consider using a small vise grip to unseat it from the rubber o-ring. You may also need to use the vise grip to get leverage to unseat it. Make sure to wear gloves for better grip.