If you want to eliminate airborne contaminants in your car, then a new cabin filter from Filterheads.com could be the solution you are looking for. The cabin filter plays a crucial role in maintaining the air quality inside your vehicle, and replacing it is a simple yet effective way to ensure that you and your passengers breathe clean, fresh air.
Here’s a step-by-step guide on how to install a new cabin filter:
- Locate the cabin filter: The cabin filter is usually situated on the passenger side of the vehicle behind the glovebox.
- Access the filter: Open the glovebox, remove the access panel, and unclip both sides of the housing cover to gain access to the filter tray.
- Remove the old filter: Unclip and remove the filter tray, then take out the old filter from the housing.
- Install the new filter: Place the new AQ1262C filter with its airflow indicating arrow pointing down, and reinstall the frame into the housing by securely clipping it into place. Then put back the housing cover and access panel.
- Complete the installation: Close the glovebox, and your car is now equipped with a new cabin filter that will effectively trap airborne contaminants.
By following these simple steps, you can bring an end to unwanted airborne particles in your vehicle. Visit our website to order your filter and ensure that it fits perfectly in your car.
Where is the cabin filter located?
The cabin filter is located on the passenger side of the vehicle behind the glovebox.
How do I replace the cabin filter?
1. Open the glovebox. 2. Remove the access panel. 3. Unclip both sides of the housing cover to remove it. 4. Unclip and remove the filter tray. 5. Remove the old filter. 6. Install the new AQ1262C filter with its airflow indicating arrow pointing down. 7. Reinstall the frame into the housing to clip it into place. 8. Reinstall the housing cover. 9. Reinstall the access panel. 10. Close the glovebox.
Where can I order the new cabin filter?
You can order your filter from Filterheads.com to ensure that it fits.