Are you looking to change the oil in your 2017 Chevy Colorado? Look no further! In this step-by-step guide, I’ll walk you through the process of draining the oil and changing the filter, so you can get back on the road with a smoothly running engine.
The 2017 Chevy Colorado comes equipped with a 3.6-liter V6 engine, specifically the LGZ version. It’s essential to note that this guide is tailored to the 2017 and up V6 motors.
Gathering the Necessary Supplies
Before you begin, make sure to have the following supplies on hand:
- Mobil 1 5w30 oil (6 quarts)
- AC Delco oil filter
- 15mm socket
- 24mm socket
- Extensions for the sockets
- Oil drain pan
Draining the Oil and Changing the Filter
1. Locate the oil filter, which is accessible from the engine bay, and remove the drop-in filter.
2. Use a 15mm socket to loosen the drain plug and let the oil drain completely into the oil drain pan.
3. Inspect the oil drain plug and replace the gasket if necessary before re-installing it.
4. Remove the old oil filter using a 24mm socket and extensions to access the filter cap.
5. Replace the gasket on the filter cap and install the new oil filter, ensuring it locks in place with the tabs.
6. Reinstall the filter cap and hand-tighten before using the socket to secure it fully, being cautious not to overtighten the plastic cap.
Refilling the Oil
1. Pour 5 quarts of Mobil 1 5w30 oil into the engine.
2. Check the oil level using the dipstick, adding more oil as needed to reach the optimum level.
3. Once the oil level is satisfactory, replace the oil fill cap and start the engine to ensure proper oil circulation.
Final Steps
Don’t forget to reset the oil life monitor and driver control center before hitting the road!
By following these steps, you can efficiently change the oil in your 2017 Chevy Colorado and maintain the optimal performance of your vehicle. Now, you’re ready to take on the road with confidence!
What type of engine does the 2017 Chevy Colorado have?
The engine is a 3.6 liter V6, specifically the LGZ version of the motor, which is slightly different than the previous LFX. This applies to 2017 and up V6 motors.
Where is the oil filter located in the 2017 Chevy Colorado?
The oil filter in the 2017 Chevy Colorado is a drop-in filter that is accessible from the engine bay, located behind the fuse cover box to the right of the engine on the driver’s side.
What type of oil is recommended for the 2017 Chevy Colorado?
The Mobil 1 5w30 specification is recommended for the 2017 Chevy Colorado. The vehicle requires 6 quarts of this oil.
What tools are needed to change the oil in a 2017 Chevy Colorado?
To change the oil in a 2017 Chevy Colorado, you’ll need a 15 millimeter socket to loosen the drain plug, a 24 millimeter socket to loosen the oil filter cap, and possibly some extensions to access the oil filter cap.
How much oil does the 2017 Chevy Colorado require?
The 2017 Chevy Colorado requires 6 quarts of oil. It’s recommended to start with a 5 quart jug first and then top off with the remaining quart as needed.