If you own a Chevy Equinox, it’s essential to perform regular maintenance, including changing the engine oil and filter. In this step-by-step guide, I’ll show you how to do it yourself with just a few tools and some simple instructions.
Tools You’ll Need
Before you begin, gather the following tools: engine oil, oil filter, needle-nose pliers, 15-millimeter socket, ratchet, breaker bar, oil pan, and a 1.5-inch socket (or an adjustable wrench as an alternative).
Step 1: Drain the Oil
Start by removing the lid to the oil reservoir. Then, locate the oil pan underneath the car and the oil drain plug. Place the oil pan underneath the drain plug, use a 15mm socket and a breaker bar to loosen the plug, and allow the oil to drain out completely. Once drained, replace the drain plug and tighten it with a ratchet.
Step 2: Replace the Oil Filter
Locate the oil filter, and remove the dipstick to make room to work. Use an adjustable wrench to unscrew the filter, ensuring to turn the wrench in the opposite direction for extra room. Once the old filter is removed, replace the O-ring with the new one provided with the new filter. Install the new filter by hand and then use the wrench to tighten it securely.
Step 3: Add New Oil
Refer to your car’s manual or the oil cap for the recommended oil type and viscosity. For a Chevy Equinox, it’s typically 5W30 and Dexos1 synthetic blend. Additionally, ensure you have the correct filter for your engine size (e.g., 2.4 liters or 3.6 liters). After acquiring the right oil and filter, pour in the specified amount of oil according to your engine size.
Step 4: Reset the Oil Life Indicator
After adding the new oil, start the car and let it run briefly to ensure proper oil circulation. Then, reset the oil life indicator by accessing the menu button near the radio and following the on-screen prompts to reset the oil life.
With these simple steps, you’ve successfully changed the engine oil and filter on your Chevy Equinox, promoting better engine performance and longevity. Remember to dispose of the old oil and filter properly. If you found this guide helpful, feel free to share it with other Equinox owners. Happy servicing!
What tools are needed to change the engine oil and filter on a Chevy Equinox?
To change the engine oil and filter on a Chevy Equinox, the following tools are needed: engine oil, oil filter, needle nose pliers, 15 millimeter socket, ratchet, breaker bar, oil pan, and an adjustable wrench.
How do you change the engine oil on a Chevy Equinox?
To change the engine oil on a Chevy Equinox, locate the oil pan underneath the car, position the oil pan to catch the oil, use a 15-millimeter socket with a breaker bar to loosen the oil drain plug, remove the plug, allow the oil to drain, and then re-tighten the drain plug.
How do you change the oil filter on a Chevy Equinox?
To change the oil filter on a Chevy Equinox, remove the dipstick for the oil to create room for an adjustable wrench, use the wrench to remove the old oil filter, replace the O-ring with a new one, install the new oil filter, and then torque it down with the adjustable wrench.
What type of oil and filter is needed for a Chevy Equinox?
For a Chevy Equinox, the recommended engine oil is 5W30 Dexos 1 synthetic blend. The oil filter needed depends on the engine size, with a 2.4-liter engine requiring a 9018 filter and a 3.6-liter engine requiring a 10575 filter.
How much oil is needed for a Chevy Equinox?
For a 2.4-liter engine, 5 quarts of oil are needed. For a 3.6-liter engine, 6 quarts of oil are needed.
How do you reset the oil life on a Chevy Equinox?
To reset the oil life on a Chevy Equinox, turn the car to the Run position, let it run for a second, then turn it off. Press the menu button by the radio, hold down the ‘set clear’ button, select ‘yes’, and then press ‘set clear’ again to reset the oil life.
Where can you purchase the oil and filter for a Chevy Equinox?
The engine oil and filter for a Chevy Equinox can be purchased at Walmart, as they are cheaper and easily numbered for different engine sizes.