Welcome to another video where I will be demonstrating a power steering fluid flush on a 2007 Silverado Classic. It’s important to keep up with regular maintenance tasks like this one to ensure the smooth operation of your vehicle. In this blog post, we will go through the process of performing a power steering fluid flush on your 2007 Silverado Classic.
The power steering pump is located just below the alternator. To start the process, you will need a battery-powered suction pump to clear out the reservoir. If you don’t have a pump, using a turkey baster can be an alternative to remove as much old fluid as possible.
After removing the old fluid, it’s crucial to drain and flush the system with new fluid. You can visually inspect the old fluid to determine if it’s time for a change. In the case of this truck, the old fluid was visibly dirty, indicating that it was overdue for a change.
Once the old fluid is removed, it’s necessary to unlock the wheel and move it back and forth to try and extract any remaining old fluid. This step helps in preparing the system for the new fluid.
After cycling the wheel, the next step involves disconnecting the return line from the pump to drain the remaining old fluid. This allows for a complete flush of the system with the new fluid.
Once the old fluid is drained, it’s time to run new fluid through the system. It’s essential to keep an eye on the fluid level and top it off as needed. As you add new fluid, continue to cycle the wheel to ensure complete flushing and removal of any trapped air in the system.
After finishing the fluid flush, it’s important to check for any issues such as shuddering while turning the wheel, which could indicate remaining air in the system. Additional cycling of the wheel can help in purging out any trapped air. It’s also important to check the fluid level and top it off as necessary.
Although performing a power steering fluid flush can be a straightforward process, it’s crucial to pay attention to any issues that may arise, such as shuddering or unusual noises during the process. By following these steps, you can ensure that your power steering system is properly flushed and filled with new fluid, contributing to smoother and more responsive steering.
As always, if you’re unsure about performing this maintenance yourself, it’s best to consult a professional mechanic for assistance.
What is the video about?
The video is a tutorial on how to perform a power steering fluid flush on a 2007 Silverado Classic truck.
What tools are used in the video?
The video shows the use of a battery-powered suction pump, hose clamp pliers, catch can, and a funnel for the power steering fluid flush.
Is it necessary to run the engine during the process?
Yes, it is necessary to run the engine at certain points to cycle the power steering fluid and purge air from the system.
What potential issue is mentioned in the video after the fluid flush?
The video mentions experiencing a shuttering sensation while turning the wheel, which may indicate the presence of air in the system despite the flush. The issue is expected to improve with further cycling of the steering system.
Any recommendations for following similar vehicle maintenance?
The video suggests following Chris Fix’s video for a concise and detailed guide on vehicle maintenance. It also invites viewers to subscribe for updates on maintenance work, including tracking down other vehicle issues, changing wheel bearings, brake work, and more.