Welcome to Program Your Remote! Today, we will show you how to change the battery in a Ford remote key fob for vehicles with a push-button start ignition.
The remote key fob uses a CR2032 replacement battery, and you will also need a flathead screwdriver for this process.
Here are the steps to change the battery:
- Remove the emergency key by pressing the release on the back of the fob and sliding out the key.
- Use a flathead screwdriver to pry up the back of the fob to open it.
- Locate the battery inside the fob and use the screwdriver to help remove it.
- Insert the new battery with the plus side down.
- Snap the two halves of the fob back together until they are securely connected.
- Insert the emergency key back into the fob.
It’s a simple process that will ensure your Ford remote key fob continues to work effectively.
If you have any questions, feel free to ask. Your support by liking and subscribing to our channel is greatly appreciated. Thank you!
What type of battery does the Ford remote key fob use?
The Ford remote key fob uses a CR2032 replacement battery.
What tools are needed to change the battery in a Ford remote key fob?
To change the battery in a Ford remote key fob, you will need a flathead screwdriver.
How do you change the battery in a Ford remote key fob?
To change the battery in a Ford remote key fob, follow these steps: 1. Remove the emergency key from the bottom of the fob. 2. Use a flathead screwdriver to pry open the back of the fob. 3. Remove the old battery and replace it with a new CR2032 battery, ensuring the plus side is facing down. 4. Snap the two halves of the fob back together. 5. Reinsert the emergency key.
How can I support the channel?
If you found the information helpful, please consider liking the video and subscribing to the channel. Your support is appreciated.