If you’re having issues with your ignition lock cylinder, here’s a step-by-step guide to help you replace it with ease.
Firstly, locate the ignition lock cylinder, which is where you insert your key to start the vehicle.
Insert your key into the ignition and turn it to the “on” position. Then, use a pick to go through the designated hole and locate the pin that locks the ignition cylinder.
Apply gentle pressure on the pin while wiggling the cylinder to slide it out. It may take some effort, but with persistence, it will come free.
When inserting the new ignition switch, ensure it is facing the correct way with the detent pin at the bottom and the grooves aligned. Press it in firmly, and if it’s properly locked, it should not come back out.
It’s essential to note that if your vehicle has an immobilizer, using new keys will require professional programming. The chip inside the key needs to be recognized by the vehicle’s system. You can temporarily use the new key alongside the original key to bypass this issue, but reprogramming is crucial for long-term functionality.
Once the new key is in place, hold the original key next to the ignition switch to transmit the code from the original key’s chip to the immobilizer, allowing the engine to start with the new key. However, this is just a temporary solution, and professional programming is necessary for optimal performance.
Remember, for the best results and peace of mind, it’s important to use high-quality aftermarket auto parts. TRQ is dedicated to providing top-notch aftermarket auto parts engineered for reliability and performance.
Thanks for choosing and trusting TRQ for your auto part needs!
Where is the ignition lock cylinder located?
The ignition lock cylinder is located where you put your key in.
How do I replace the ignition lock cylinder?
To replace the ignition lock cylinder, follow these steps: 1. Take your keys and put them in the ignition, turn it to the on position. 2. Use a pick to go through the hole near the ignition and find the pin that locks in the ignition cylinder. 3. Push on the pin while wiggling the cylinder to slide it out. 4. Install the new ignition switch with the correct orientation and ensure it is locked in. 5. If your vehicle has an immobilizer, you will need to get new keys programmed by a professional.
Do I need to reprogram new keys for the immobilizer?
Yes, if your vehicle has an immobilizer, using new keys will require reprogramming. The chip inside the new key needs to be recognized by the immobilizer to start the engine. You can temporarily use the new key by holding it next to the original key while starting the vehicle, but it’s recommended to reprogram the new key for convenience and security.