Are you wondering how to replace the oil in your Hyundai Kona? In this post, I’ll guide you through the step-by-step process to make it easy for you.
The Hyundai Kona 2019 model with the 1.6 liter T-GDI engine requires regular oil changes to maintain its performance. Here’s a simple guide to help you replace the oil in your vehicle.
Step 1: Preparing the Vehicle
Before you start, take the car for a drive to bring the engine up to normal running temperature. Then, jack up the car to get underneath it. Make sure to keep the car somewhat level while jacking it up. Locate the oil drain plug and the oil filter underneath the car.
Step 2: Draining the Oil
Use a 17 millimeter wrench to loosen the drain plug and let the oil drain into a pan. Once the oil is drained, put the oil drain plug back in and torque it down to 30 foot-pounds.
Step 3: Replacing the Oil Filter
Use an oil filter removal tool to loosen the old oil filter. Before installing the new oil filter, fill it with fresh oil and lubricate the seal. Ensure that the old filter’s seal is still attached to it and check the oil filter housing for any existing seals. Install the new oil filter by hand tightening it.
Step 4: Adding New Oil
Refer to the manufacturer’s recommendation for the type and amount of oil needed. In this case, the Hyundai Kona requires 5W-30 oil and approximately 4.76 quarts. After adding the new oil, start the car and let it run for a few minutes. Then, turn it off and let the oil settle before checking the oil level.
Step 5: Checking the Oil Level
Check the oil level using the dipstick to ensure it’s between the full and low marks. If necessary, adjust the oil level accordingly.
After completing the oil change, ensure that there are no leaks underneath the car and that the engine oil level is correct.
Following these steps will help you perform an oil change on your Hyundai Kona, ensuring the engine runs smoothly and efficiently.
For links to the parts and tools used in this process, refer to the description below. Thank you for reading through this guide, and remember to stay updated with our future posts for more automotive tips and tutorials!
What car model is used in the tutorial?
The tutorial demonstrates how to replace the oil in a 2019 Hyundai Kona with a 1.6 liter T-GDI engine.
What tools are needed for the oil replacement?
Tools required include a 17mm wrench, oil pan, jack, jack stands, oil filter removal tool, and fresh oil.
What is the recommended engine oil for the Hyundai Kona?
The engine requires 5W-30 oil, and the capacity is 4.76 quarts.
How should the new oil filter be installed?
The new oil filter should be hand-tightened and lubricated with a little oil around the seal.