Unveiling the Nissan Rogue Starter Location: A Comprehensive Guide

If you’re experiencing starter issues with your Nissan Rogue, fear not. In this step-by-step guide, we’ll walk you through the process of replacing the starter on your Nissan Rogue, located on the back side of your engine.

First, with the hood open, use a 10 millimeter wrench to disconnect the Ground Terminal off of your battery. Then, remove the wheel by loosening and removing the lug nuts using a 21 millimeter socket. Access the starter through the wheel well area and proceed to remove it.

Unscrew the bolts holding the wiring harness and the black and white wire connector, and carefully detach them to enable the removal of the starter. Ensure to remove the nut holding the wire as well.

Once the starter is pressed in place, insert the bolts and tighten them by hand before using power tools. Remember to torque down the lug nuts to 80 foot pounds, and then proceed to reconnect the battery and center cap.

TRQ (pronounced “tork”) is committed to offering the highest quality aftermarket auto parts that are engineered with peace of mind. Thanks for choosing and using TRQ for your Nissan Rogue starter replacement.

Where is the starter located in a Nissan Rogue?

The starter of a Nissan Rogue is located on the back side of the engine.

What tools are needed to replace the starter?

To replace the starter, you will need a 10mm wrench, 21mm socket, 12mm socket, 16mm shallow socket, long extension, and a torque wrench.

What are the steps to replace the starter on a Nissan Rogue?

1. Disconnect the Ground Terminal off the battery using a 10mm wrench. 2. Remove the wheel using a 21mm socket. 3. Access the starter through the wheel well and remove the bolts and wiring harness. 4. Install the new starter and reconnect the wiring harness. 5. Reinstall the wheel and tighten the lug nuts to 80 foot pounds.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top