Is your 2020 Chevy Silverado showing a P1467 code related to the fuel pump? In this guide, we’ll walk you through the steps to replace the fuel pump in your Chevy Silverado with a 2.7-liter turbocharged four-cylinder engine.
First, if you encounter the P1467 code, you can have it read by someone with a scanner or at an auto parts store like AutoZone. Once you have the code, you might need to replace the fuel pump.
For this tutorial, we purchased the fuel pump from the Chevy dealer and are ready to replace it.
Steps to Replace the Fuel Pump
- Start by going to the battery on the passenger side and remove the negative cable using a 10mm socket to loosen the terminal.
- Remove the connector and the cover for better access to the fuel pump. There should be two 10mm bolts securing the cover.
- You’ll find four 8mm head bolts holding the fuel pump. Remove these bolts along with the two hoses and the connector.
- To remove the hoses, press the gray tab and push the hoses out. There might be a green retainer that needs to be slid out before pushing the gray tab.
- There is a plastic retainer stuck on the bracket that needs to be pried out using a flathead screwdriver or a prying tool.
- Reinstall the plastic retainer and the three fuel pump bolts. Then, reattach the hoses.
Tools Needed
To perform this replacement, you will need several tools: a 1/4 inch ratchet, 8mm and 10mm sockets, a quarter-inch drive, and a prying tool.
Conclusion
We hope this guide helps you replace the fuel pump in your 2020 Chevy Silverado. Remember to always exercise caution when working with car parts. If you found this tutorial helpful, feel free to share it with your friends. Thank you for watching!
What is the engine of a 2020 Chevy Silverado?
The 2020 Chevy Silverado comes with a 2.7 liter turbocharged four-cylinder engine.
How can I diagnose a code P1467 in the Chevy Silverado?
You can use a scanner to read the P1467 code, which can be done at a Chevy dealership or by someone with a scanner tool like AutoZone.
What tools are needed to replace the perch pump in a Chevy Silverado?
You will need a quarter-inch ratchet, an 8mm socket, a 10mm socket, a quarter-inch drive extension, and a prying tool to replace the perch pump in a Chevy Silverado.