If you want to ensure that the air in your car is free from contaminants, it’s essential to replace your cabin filter regularly. Here’s a simple guide on how to do it yourself with a new cabin filter from Filterheads.com.
The cabin filter is typically located on the passenger side of the vehicle, behind the glovebox. Follow these steps to replace it:
- Open the glovebox.
- Unhook the dampener arm.
- Push in on the sides of the glovebox to release the stops and lower the glovebox.
- Unclip both sides of the housing cover to remove it.
- Remove the old filter from the frame.
- Install the new AQ1058C filter with its airflow indicating arrow pointing down.
- Reinstall the frame into the housing and clip it into place.
- Reinstall the glovebox assembly and hook the dampener arm back on.
- Close the glovebox.
By following these steps, you can ensure that your car’s cabin filter is effectively removing airborne contaminants and providing you with clean air while driving.
Regularly replacing your cabin filter is crucial for maintaining good air quality inside your vehicle, especially if you’re someone who spends a lot of time on the road. Clean air inside the car can lead to a more pleasant driving experience and can also contribute to your overall well-being.
Remember, a clean cabin filter can also help prevent the buildup of dust and pollutants inside your car, ultimately prolonging the life of your HVAC system.
So, take the time to replace your cabin filter when needed, and enjoy the benefits of breathing clean, fresh air during your journeys.
Where is the cabin filter located?
The cabin filter is located on the passenger side of the vehicle behind the glovebox.
How do I replace the cabin filter?
1. Open the glovebox. 2. Unhook the dampener arm. 3. Push in on the sides of the glovebox to release the stops and lower the glovebox. 4. Unclip both sides of the housing cover to remove it. 5. Remove the old filter from the frame. 6. Install your new AQ1058C filter with its airflow indicating arrow pointing down. 7. Reinstall the frame into the housing to clip it into place. 8. Reinstall the glovebox assembly. 9. Hook the dampener arm back on to the glovebox. 10. Close the glovebox.