Welcome to Program Your Remote! Today, we’re going to guide you through the programming procedure for full-size GM trucks and SUVs from 2007 to 2010.
To get started, you’ll need your ignition key and all the remotes you have for the vehicle, including any previously programmed ones that need to be reprogrammed when adding new remotes.
First, insert the key into the ignition and turn it to the “on” position. This is as far as you can turn the ignition forward without starting the vehicle.
Next, use the driver information button to navigate until you see “Press to relearn remote key.” Then, press the set reset button to activate remote key learning.
Once in this mode, hold down the lock and unlock buttons on the remote simultaneously until you hear a chime. This indicates that the remote has been successfully programmed. If you have multiple remotes, repeat this step for each one.
The vehicle can have a total of eight remotes programmed at one time, and once you’re finished, turn the ignition to the “off” position to exit programming mode.
Finally, test the remotes to ensure they are working properly. Thanks for watching!
What do I need to program my remote for full size GM trucks and SUVs from 2007 to 2010?
You will need the ignition key and all remotes for the vehicle, including any remotes that have previously been programmed to the vehicle, as they will need to be reprogrammed whenever you add additional remotes.
What is the first step in the programming procedure?
Put the key in the ignition and turn it to the on position, which is as far as you can turn the ignition forward without actually starting the vehicle.
How do I relearn the remote key?
Using the driver information button, press it until you see ‘press to relearn remote key.’ Then press the set reset button to make the remote key learning active.
What is the process for programming the remotes?
Hold down the lock and unlock button on the remote at the same time until a chime is heard, indicating that the remote has been programmed. Additional remotes can be programmed by repeating this step. A total of eight remotes can be programmed to the vehicle at one time.
How do I exit programming mode?
Turn the ignition to off once all remotes have been programmed.
What should I do after programming the remotes?
Test the remotes to ensure they are working properly.
Any additional tips or information?
If you only have one remote, you can skip the step of programming additional remotes. Make sure to include any remotes that already work for the vehicle when adding additional remotes to the programming.