Replacing Your 2011 Honda Pilot Key Fob Battery: A Detailed Guide

If you’ve noticed that the range of your key fob has decreased or you’re having to press the lock/unlock buttons multiple times for them to work, it’s likely time to replace the battery. This is a quick and inexpensive process that you can easily do yourself.

Here’s what you’ll need:

  • CR1616 battery
  • Phillips head screwdriver
  • Flathead screwdriver

Follow these steps to replace the battery:

  1. Use the Phillips head screwdriver to remove the small screw securing the key fob cover.
  2. Use the flathead screwdriver to carefully pop open the cover by lifting one end and pulling it toward the key blade.
  3. Remove the module from the key fob.
  4. Use your fingernail or a flathead screwdriver to remove the clip covering the battery.
  5. Take note of the battery’s orientation and carefully remove it from the key fob.
  6. Install the new CR1616 battery by ensuring the proper orientation and securely clipping it into place.
  7. Slide the module back into the key fob and snap the cover back into place.
  8. Reinsert the screw and tighten it securely.

Once you’ve completed these steps, your key fob should be ready to go with the new battery. Make sure to test it to ensure the light comes on.

What should I do if the range of my key fob has decreased or I have to press the lock/unlock button multiple times for it to work?

It’s probably a good time to replace the battery in your key fob.

What do I need to replace the battery in my key fob?

You will need a CR1616 battery, a Phillips head screwdriver, and a flathead screwdriver.

How do I replace the battery in my key fob?

1. Remove the screw holding the key fob cover. 2. Use a flathead screwdriver to open the cover. 3. Lift and pull the cover towards the key blade to expose the module. 4. Remove the module. 5. Use a flathead screwdriver to remove the clip and expose the 1616 battery. 6. Pry out the old battery and replace it with the new one, ensuring correct orientation. 7. Reassemble the key fob and test it.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top