How to Replace a Headlight on a 2013 Ford Edge
Today, we’re going to show you how to replace a burned-out headlight on a 2013 Ford Edge. This model does not have HID and projectors, so the process should be easy. We will need a 9012 bulb, and we’re going to replace both headlights because if one has burned out, the other is likely to follow suit soon.
First, we remove the cover on the passenger side to access the headlight. Then, we carefully remove the old bulb by turning it counterclockwise and gently pulling it out. We inspect the old bulb and it’s clear that it needs replacing. We then open our new Philips crystal vision ultra bulb, which we got from Amazon at a much lower cost than at auto parts stores.
Next comes the debated topic of whether to touch the new bulb with our fingers. We clip the new bulb in place and carefully maneuver it back into the headlight housing. Once it’s secured, we turn it clockwise to lock it in place and put the protective cover back on. We tested the new bulb, and voila, it’s working perfectly.
After this, we proceed to replace the headlight on the driver’s side, which follows the same process but in tighter quarters. And that’s all it takes to change the headlight on a 2013 Ford Edge. We hope you found this tutorial helpful!
If you have any thoughts or tips about replacing headlights, feel free to share them in the comments. Don’t forget to give this video a thumbs up if you found it useful, and consider subscribing for more car maintenance tutorials like this. See you next time!
What type of car is being worked on?
The car being worked on is a 2013 Ford Edge.
What kind of headlight does the car have?
The car does not have HID headlights, but it does have projectors.
What type of bulb does the headlight use?
The headlight uses a 9012 bulb.
Do you touch the new headlight bulb with your fingers?
The person in the video asked for viewer opinions on whether to touch the new headlight bulb with fingers or not. They then proceeded to install the new bulb without specifying whether they touched it or not.
What are the steps to replace the headlight on a 2013 Ford Edge?
The steps to replace the headlight on a 2013 Ford Edge are as follows: Remove the cover, detach the wires, unscrew the old bulb, insert the new bulb, reattach the wires, and replace the cover. The process is the same for both the passenger side and the driver’s side of the vehicle.