2013 Ford Escape: A Comprehensive Guide to Checking & Maintaining Transmission Fluid

If you have a 2013 Ford Escape with a 2.5 motor and you’re looking to change, add, or check the transmission fluid, you’re in the right place. Our expert, Cody, has been working on this car, and he’s here to show you the process.

Before we jump into the steps, it’s important to know the type of fluid you’ll need. The 2013 Ford Escape requires Mercon LV fluid, which is indicated on the cap where you fill it up. Additionally, you can also use Valvoline Max Life transmission fluid, which has shown excellent performance in many transmissions over the years.

Now, let’s move on to the process of changing the fluid. Start by locating the drain plug and removing it to let the fluid drain out. Remember the position of the drain plug and tighten it back up appropriately once the draining is complete.

When it comes to checking the fluid, you’ll find the fill plug on the other side of the transmission. Remove the fill plug and ensure that the fluid level is correct. It’s essential to have a steady stream of fluid coming out, indicating that the transmission is adequately filled.

Now, how to fill up the transmission? You’ll need to use a funnel to add the fluid, but note that the tight space in the engine compartment might pose a challenge. It’s a bit tricky to position the funnel correctly, especially for the 2.5 motor, so take your time with this step.

Despite the challenges that come with working on this type of car, with the right guidance and attention to detail, it can be a manageable task. Once you’ve gone through the process, you’ll have successfully changed, added, or checked the transmission fluid in your 2013 Ford Escape.

We hope this guide has been helpful to you. For more car maintenance tips and tutorials, stay tuned for future updates.

What kind of fluid should I use for a 2013 Ford Escape transmission?

The recommended fluid for a 2013 Ford Escape transmission is Mercon LV. Additionally, Valvoline Max Life transmission fluid is also suitable for use in this vehicle.

How do I change the transmission fluid in a 2013 Ford Escape?

To change the transmission fluid, locate the drain plug on the transmission and remove it to let the fluid drain out. Remember the position of the drain plug, and when refitting, tighten it to the specified torque. After draining, replace the plug and do not forget to tighten it properly to prevent fluid leakage during operation. To refill the fluid, use a funnel to pour the fluid into the designated fill plug located near the axle, ensuring a steady stream without overfilling.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top