Are you tired of paying someone else to replace the cabin filter in your vehicle? Well, why not take matters into your own hands and do it yourself? By purchasing a high-quality cabin filter from Filterheads.com, you can easily replace it and save money in the process.
When you buy a filter from Filterheads.com, you can rest assured that you are getting a top-notch, secure, and engineered-to-fit cabin filter that will function just like the original filter. Additionally, our instructional video will provide you with the confidence and guidance you need to do the job correctly.
Step-by-Step Guide
- Open the glovebox.
- Using a common screwdriver, remove the panel on the right side of the glovebox.
- Remove the top panel by unclipping it starting from the right side.
- Close the glovebox and remove the two 7mm bolts that secure the bottom of the glovebox to the assembly.
- Remove the two 7mm bolts that secure the top of the glovebox to the assembly.
- Open the glovebox and remove it from the assembly. It is held in place by plastic tabs on the back.
- Turn the glovebox to access the light connector. Disconnect the light connector from the back of the glovebox by pinching the clip and set the glovebox aside.
- Remove the two Phillips screws that secure the filter door into place.
- Unclip the sides of the filter door and fold it down to remove the filter.
- Install your new AQ1227 filter into the housing with its air flow indicator arrow pointing down. Flip the filter door up and clip the sides back onto the housing. Reinstall the two screws that secure the door to the housing.
- Lift the housing close to the opening and reconnect the light connector.
- Reinstall the glovebox into the assembly and make sure the clips are secured.
- With the glovebox open, reinstall the two 7mm bolts that secure the top of the glovebox to the assembly.
- Close the glovebox.
- Reinstall the top panel starting from the left side and make sure the clips are engaged. Also, reinstall the side panel and ensure the clips are engaged.
- Reinstall the two 7mm bolts that secure the bottom of the glovebox to the assembly.
By following these simple steps, you can easily replace the cabin filter in your vehicle and ensure that your car’s air stays clean and fresh. So, why wait? Purchase your filter at Filterheads.com today and experience the satisfaction of doing it yourself.
Why should I replace a cabin filter in my vehicle?
Cabin filters need regular replacement to ensure clean air circulation inside the vehicle and to maintain the effectiveness of the HVAC system.
What are the benefits of purchasing a cabin filter from Filterheads.com?
Filterheads.com provides secured quality cabin filters that are engineered to fit and function exactly like the original filter. Purchasing from Filterheads.com also provides access to instructional videos for confident self-replacement.
How do I replace the cabin filter in my vehicle?
The following are the steps to replace the cabin filter in your vehicle: 1. Open the glovebox. 2. Using a common screwdriver, remove the panel on the right side of the glovebox. 3. Remove the top panel by unclipping it starting at the right side. 4. Close the glovebox. 5. Remove the two seven millimeter bolts that secure the bottom of the glovebox to the assembly. 6. Remove the two seven millimeter bolts that secure the top of the glovebox to the assembly. 7. Open the glovebox and remove it from the assembly. 8. Turn the glovebox to gain access to the light connector. 9. Disconnect the light connector from the back of the glovebox by pinching the clip and set the glove box aside. 10. Remove the two Phillips screws that secure the filter door into place. 11. Unclip the sides of the filter door and fold it down to remove the filter. 12. Install the new AQ1227 filter into the housing with its air flow indicator arrow pointing down. 13. Flip the filter door up and clip the sides back onto the housing. 14. Reinstall the two screws that secure the door to the housing. 15. Lift the housing close to the opening and reconnect the light connector. 16. Reinstall the glovebox into the assembly and make sure the clips are secured. 17. With the glovebox open reinstall the two seven millimeter bolts that secure the top of the glovebox to the assembly. 18. Close the glovebox. 19. Reinstall the top panel starting from the left side and make sure the clips are engaged. 20. Reinstall the side panel and make sure the clips are engaged. 21. Reinstall the two seven millimeter bolts that secure the bottom of the glovebox to the assembly.
Where can I purchase the cabin filter?
You can purchase the cabin filter at Filterheads.com.