Are you tired of airborne contaminants in your car? It might be time for a new cabin filter from Filterheads.com. Installing a new cabin filter is easier than you might think, and it can make a huge difference in the air quality inside your vehicle.
To start, locate the cabin filter, which is usually situated on the left corner of the footwell. Pinch the sides at the tabs and pull down to remove the securing tabs from their catch. Then, remove the bottom panel from the glovebox assembly to access the filter housing cover.
The next step is to unscrew the filter housing cover using a T20 Torx driver. Once the cover is removed, take out the old filter and clean out any debris inside the housing. This is also a good time to check for any signs of mold or mildew and clean the area if necessary.
Now, it’s time to install the new AQ1211 filter into the housing. Make sure the airflow indicating arrow is pointing towards the back of the car. It might be easier to pinch the sides of the filter down and rotate it as needed, but ensure that the hard sides are on the top and bottom with the pleats in a vertical position.
Before completing the installation, double-check that the filter fits properly by visiting the Filterheads website to order the correct filter for your car.
Slide the housing cover back into position and press to lock it in place. Reinstall the footwell panel by pressing up on the tabs to secure them on the screws.
With a new cabin filter in place, you can breathe easy knowing that the air inside your car will be free from contaminants. Say goodbye to dust, pollen, and other pollutants that can make driving unpleasant, and enjoy a cleaner and healthier driving experience.
Where is the cabin filter located?
The cabin filter is located on the left corner of the footwell.
How do I remove the securing tabs from the cabin filter?
Pinch the sides at the tabs and pull down to remove the securing tabs from their catch.
How do I install the new filter?
Install your new AQ1211 filter into the housing with its airflow indicating arrow pointing towards the back of the car. Ensure that the hard sides are on the top and bottom with the pleats vertical.
Where can I order the filter?
Visit Filterheads.com to order your filter and ensure that it fits.
How do I secure the housing cover and footwell panel back into place?
Slide the housing cover into position and press to lock it into place. Reinstall the footwell panel and press up on the tabs to secure them on the screws.