2015 Nissan Sentra Oil Change: Step-by-Step Procedure and Tips for Completion

In this millennial review, we will demonstrate the process of performing an oil change on a 2016 Nissan Sentra. The procedure and specifications we will cover are applicable to all US models of the Sentra from 2013 to the present.

The Nissan Sentra is equipped with a four-cylinder engine, and according to the manufacturer’s recommendations, the oil change is recommended at around five thousand miles or every six months. In our demonstration, the car has reached around forty-six hundred miles, making it overdue for an oil change.

For this engine, Nissan calls for four and a quarter quarts of SAE 0W-20 oil, which is a thinner oil designed for high fuel efficiency cars. As for the oil brand, any fully synthetic oil from a reputable manufacturer will suffice. In this demonstration, we use Mobil 1 0W-20 oil and a Fram oil filter (part number PH 6607).

In addition to the oil and filter, you will need basic tools such as a 14-millimeter socket or box wrench, a ratchet, and adjustable pliers. Having a jack or jack stands to lift the car is essential for accessing the underside of the vehicle.

Oil Change Procedure

The first step is to locate the hood release inside the car and then access the engine compartment to check the oil level and locate the oil drain plug and filter. It is essential to loosen the oil fill cap before draining the oil to facilitate smooth draining.

After properly securing the car, the next steps involve removing the drain plug to drain the old oil, replacing the oil filter, and then refilling with the specified amount of new oil.

Completing the Oil Change

After refilling the oil, it is crucial to check the oil level and start the engine to ensure proper operation. Upon completing the oil change, it’s important to reset the oil change indicator light, record the mileage at the time of the change, and take the car for a test drive.

Performing regular oil changes is vital for maintaining the health and longevity of your vehicle’s engine. By following the manufacturer’s recommendations and using quality products, you can ensure that your car runs smoothly for years to come.

Thank you for joining us in this DIY oil change demonstration for the Nissan Sentra. For more automotive maintenance tips and tutorials, be sure to subscribe and leave us a comment to share your experience.

What type of oil does a 2016 Nissan Sentra use?

The 2016 Nissan Sentra uses 4 and a quarter quarts of SAE 0W-20 oil, preferably fully synthetic.

What tools are needed for an oil change on a Nissan Sentra?

Tools needed for an oil change on a Nissan Sentra include a 14 millimeter socket or box wrench, a ratchet, adjustable pliers for the oil filter, a small drain bucket, and a funnel.

What are the steps to change the oil on a Nissan Sentra?

1. Lift or jack up the car and locate the oil drain plug and oil filter. 2. Loosen the drain plug and let the oil drain into the bucket. 3. Remove the old oil filter and replace it with a new one, making sure to prime the seal first. 4. Tighten the drain plug and clean off any excess oil. 5. Refill the car with the appropriate amount of new oil. 6. Check the oil level, start the car to ensure it runs properly, and reset the oil change indicator light if applicable.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top