2016 Ford Explorer Cabin Air Filter: A Complete Replacement Guide

If you’re looking to eliminate airborne contaminants in your car, a new cabin filter from Filterheads.com can help you achieve just that. Here’s how you can replace the cabin filter in your vehicle:

  1. Locate the cabin filter on the passenger side of the vehicle and open the glovebox.
  2. Remove the dampener cord from the glovebox.
  3. Push in on both sides of the glovebox to release the stops and lower the glovebox.
  4. Unclip both sides of the housing cover to remove it.
  5. Take out the old filter from the housing and clean out any debris inside.
  6. Install your new AQ1153 filter into the housing with its airflow indicating arrow pointing down.
  7. Reinstall the filter housing door.
  8. While pulling the dampener cord down, partially close the glovebox to reengage the stoppers.
  9. Reinstall the dampening cord and close the glovebox.

By following these simple steps, you can ensure the air inside your car remains clean and free from harmful contaminants. Visit Filterheads.com to order a compatible filter for your vehicle and take a step towards cleaner and fresher air during your drive.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top