Changing the 2016 Ford Fusion Cabin Air Filter: A Comprehensive How-to Guide

If you want to put an end to airborne contaminants in your car, a new cabin filter from Filterheads.com may be just what you need. Here’s a step-by-step guide on how to replace your car’s cabin filter:

  1. Open the glovebox.
  2. Uninstall the side panel.
  3. Remove the panel using a seven millimeter nut driver to remove the bolts.
  4. Lower the glovebox, being careful not to stress the hoses and wires still connected.
  5. Disconnect the light.
  6. Remove the two screws securing the filter housing door.
  7. Unclip both sides of the housing cover to remove it.
  8. Take out the old filter from the housing and clean out any debris inside.
  9. Install your new AQ1227 filter into the housing with its airflow indicating arrow pointing down.
  10. Close the filter housing and reinstall the screws.
  11. Reinstall the glovebox light.
  12. Reinstall the glovebox assembly by aligning their tabs with their catch.
  13. Reinstall the two bolts and the panel.
  14. Close the glovebox.

By following these simple steps, you can enjoy cleaner air inside your car. Visit Filterheads.com to order your filter and ensure that it fits perfectly in your vehicle.

How can I install a new cabin filter in my car?

To install a new cabin filter in your car, follow these steps: 1. Open the glovebox. 2. Uninstall the side panel. 3. Remove the panel. 4. Use a seven millimeter nut driver to remove the bolts. 5. Lower the glovebox, careful not to stress the hoses and wires still connected. 6. Disconnect the light. 7. Remove the two screws securing the filter housing door. 8. Unclip both sides of the housing cover to remove it. 9. Remove the old filter from the housing and clean out any debris inside. 10. Install your new AQ1227 filter into the housing with its airflow indicating arrow pointing down. 11. Close the filter housing. 12. Reinstall the screws. 13. Reinstall the glovebox light. 14. Reinstall the glovebox assembly by aligning their tabs with their catch. 15. Reinstall the two bolts. 16. Reinstall the panel. 17. Reinstall the side panel by aligning the tabs. 18. Close the glovebox. 19. Visit our website to order your filter to ensure that it fits.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top