If you own a 2011 Chevy Traverse and need to replace the battery, you may have discovered that the battery is located in a compartment behind the passenger seat rather than under the hood. This placement decision by Chevy engineers can be frustrating, but with the right tools and a little patience, you can successfully replace the battery.
First, you will need an impact with a T20 bit, a 13mm socket with an extension, and a 10mm socket. These tools will allow you to access and remove the battery cover and the battery itself.
Start by removing the floor panel and plastic covering to access the battery compartment. Once you have exposed the battery, use the 10mm socket to loosen the nuts securing the battery cover. Then, carefully remove the cover to reveal the battery setup.
With the cover off, you can disconnect the battery terminals, starting with the negative (black) terminal followed by the positive (red) terminal. Remember to disconnect the black terminal first and reconnect it last when installing the new battery.
Next, use an extension and the right-sized socket to remove the battery lock and carefully extract the old battery from its compartment. Take note of the positioning and orientation of the old battery, as you will need to place the new battery in the same way.
Once the old battery is out, position the new battery in place, reconnect the terminals in the correct order, and secure the battery lock. Ensure everything is properly connected and in place before reattaching the battery cover and floor panel.
Finally, secure the floorboard screw and close the compartment. While the process may seem needlessly complicated due to the unconventional battery placement, you can successfully replace the battery with the right tools and a methodical approach.
By following these steps, you can complete the battery replacement in your 2011 Chevy Traverse without the need for professional assistance. Remember to take your time and exercise caution throughout the process to ensure a successful battery replacement.
Thank you for reading and best of luck with your battery replacement!
Where is the battery located in a 2011 Chevy Traverse?
The battery in a 2011 Chevy Traverse is located in a compartment behind the passenger seat instead of under the hood.
What tools are needed to replace the battery?
To replace the battery, you will need an impact with a T20 bit, an extension with a 13mm socket, and a 10mm socket.
How is the battery cover removed?
To remove the battery cover, you need to use an impact with a T20 bit to unscrew a little screw, pop the floor panel, and use an extension with a 13mm socket to remove the cover.
What are some challenges when replacing the battery?
Some challenges when replacing the battery include the awkward placement of the battery under the floor panel and the need for specific tools and extensions to access and remove it.