If you are experiencing a P0013 error code in your vehicle, don’t worry. In this article, we will provide you with two practical solutions to fix the error code at home.
The P0013 error code indicates that the Engine Control Module (ECM) has determined that the bank 1 exhaust camshaft oil control valve has an open or short circuit.
Method A: Oil Change
1. Locate the oil drain plug on your vehicle and place an oil collection pan underneath it.
2. Use a socket ratchet to remove the plug from the oil pan on your vehicle. Once removed, the oil should start flowing out into your collection pan.
3. Once all the oil is drained, replace the drain plug and tighten it back on.
4. Locate the oil filter, usually located beside the oil pan or under the hood of your vehicle near the engine. Place the collection pan under the filter to catch any oil. Spread a bit of fresh oil evenly on the new filter’s gasket, then install the new oil filter and tighten.
5. Fill the vehicle with fresh oil as per the amount specified in your owner’s manual. After the oil change, start the engine, let it run, and recheck the oil level.
6. Dispose of the used oil in an airtight container and recycle it at an auto store or recycling center.
Method B: The Camshaft Oil Control Valve
The camshaft oil control valves are usually located in cars that have engines with variable valve timing systems in them.
1. Carefully remove the camshaft oil control valve from the engine.
2. Use a valve cleaner to clean the camshaft oil control valve, then use a multimeter to perform a test on the valve.
If the valve resistance is outside the range of 6.9 ohms to 7.9 ohms, it indicates that the camshaft oil control valve is faulty and needs to be replaced.
After the repair, you can use the zeus app to clear the error code and ensure that everything is fine with your vehicle.
What does error code P0013 indicate?
Error code P0013 indicates that the ECM has determined that the bank 1 exhaust camshaft oil control valve has an open or short circuit.
What are the DIY methods to fix the P0013 error code?
There are two DIY methods to fix the P0013 error code. Method A involves performing an oil change, while Method B involves addressing the camshaft oil control valve.
How can I perform an oil change to fix the P0013 error code?
To perform an oil change, locate the oil drain plug on your vehicle, remove the plug to drain the old oil, replace the oil filter, and fill the vehicle with fresh oil as specified in the owner’s manual. After the oil change, start the engine and recheck the oil level.
Where are the camshaft oil control valves usually located?
The camshaft oil control valves are usually located in cars that have engines with variable valve timing systems in them.
How do I test the camshaft oil control valve?
To test the camshaft oil control valve, carefully remove it from the engine, clean it with a valve cleaner, and use a multimeter to perform a resistance test at an ambient temperature of 68 degrees Fahrenheit. The valve resistance should be between 6.9 ohms to 7.9 ohms. If no reading is obtained, it indicates that the camshaft oil control valve is faulty and needs to be replaced.