If you are encountering a P0131 error code, this article will provide you with three practical solutions to resolve the issue at home.
First, using the Zeus app, scan your vehicle to identify the error code P0131, which indicates a fault in the oxygen sensor located in the bank one sensor one location of the vehicle.
Solutions to Fix the Error Code:
Method A: Patch the Exhaust Leaks
Start by addressing any exhaust leaks. Begin by cleaning the leaking area with sandpaper and a wet wipe. Then, apply exhaust putty to seal the leaking area, ensuring a proper application and allowing it to cure for 2 to 24 hours, depending on the external temperature.
Method B: Wrap the Exhaust Leaks
Clean the leaking area with sandpaper and a wet wipe before wrapping the heat wrap around the area, overlapping it a couple of inches on each side. Repeat the process three or four times, and then let the car run for 30 minutes to cure it and create a permanent fix.
Method C: Check the Oxygen Sensor
Inspect the oxygen sensor located before the catalytic converter for any damages. Visually check the sensor’s electrical connections, wire harness, and metal tabs. If any damages are found, replace the oxygen sensor.
Upon completing the repair, use the Zeus app to clear the error code and rescan your vehicle to ensure that the issue has been resolved.