Today, I’ll show you how to replace the oil sensor on a 2007-2013 Chevy or GMC truck 1500 with a 5.3 liter engine.
You don’t need many tools for this job, just a ratchet that can swivel, an extension, a swivel end, and a 27 millimeter socket. You’ll also need a new sensor and a replacement filter.
First, find the oil sensor located at the back of the engine. It’s behind the plastic shroud near the brake booster.
To remove the sensor, use the 27 millimeter socket and carefully detach it. Inside, you’ll find a filter that needs to be replaced. Some kits include a replacement filter, so ensure that it’s changed during the process.
To remove the filter, use a small bolt that fits inside the sensor to pull it out. Once removed, install the new sensor and reattach the plug. Don’t forget to put the little gray clip back on if it was removed.
After replacing the sensor and filter, start the engine to ensure everything is functioning correctly.
That’s it! Now you know how to replace the oil sensor on your Chevy or GMC truck. If you found this guide helpful, feel free to share it with others.
What tools do I need to replace the oil sensor on a 2007-2013 Chevy or GMC truck 1500 5.3 liter?
You will need a ratchet that can swivel, an extension, a 27 millimeter socket, a new sensor, and a bolt to help pull out the sensor. Some kits may include a filter, but make sure to replace it if needed.
Where is the oil sensor located on a 2007-2013 Chevy or GMC truck 1500 5.3 liter?
The oil sensor is located at the back of the engine behind the plastic shroud, near the brake booster. It can be accessed by removing the plastic shield and reaching towards the back of the engine.
How do I replace the oil sensor?
To replace the oil sensor, first, remove the plastic shield and access the sensor. Use a 27 millimeter socket to unscrew the sensor. Replace the filter if necessary. Then, install the new sensor and reconnect the plug, ensuring the little gray clip is in place.
Any tips for replacing the oil sensor?
When pulling out the sensor, using a bolt to assist in pulling it out can be helpful. Additionally, ensure the little gray clip is placed back on when reconnecting the plug.
How can I test if the replacement oil sensor works?
After replacing the oil sensor, start the vehicle to test if it is functioning properly.