If you own a 2013-2019 Ford Escape and you need to change your battery, it’s essential to reset the battery monitor sensor (BMS) to ensure everything continues to function correctly. Additionally, if you experience issues like the auto start-stop feature not working or smart touch doors malfunctioning after a battery change, resetting the BMS may solve these problems.
The BMS is designed to protect the vehicle’s overall system by disabling unnecessary features if it detects a change in the battery. Here’s a simple step-by-step guide to reset the BMS:
- Sit in the vehicle and ensure the push-button start is enabled or have the key ready.
- Turn the key on and flash the headlights five times.
- Tap the brake pedal three times.
- Wait for about five to ten seconds.
- Look over to the right side of the dash, and the battery light will flash three times, indicating the BMS reset.
For vehicles with a push-button start, follow these additional steps:
- With the push-button start enabled and the vehicle not running, flash the high beams five times.
- Tap the brake pedal three times.
- Wait for five to ten seconds, and the battery light will flash three times, signifying the BMS reset.
For F-150s and Super Duties with the battery monitor system, the process is similar, with slight variations in the sequence.
After performing the reset, the vehicle’s features should come back online, resolving any issues caused by the battery change. It’s important to note that this method has been successful for various Ford vehicles, but it’s always a good idea to consult your vehicle’s manual or a professional if you encounter any difficulties.
If you own a newer Ford vehicle and attempt to reset the BMS using this method, I’d love to hear about your experience. Remember, safety always comes first, so if you’re unsure, seek assistance from a qualified professional.
Thank you for reading, and I hope this guide helps you reset the battery monitor sensor on your Ford Escape effortlessly. Have a great day!
How do I reset the battery monitor sensor on a 2013-2019 Ford Escape?
To reset the battery monitor sensor on a 2013-2019 Ford Escape, follow these steps: 1. Sit in the vehicle and push the button start and key. 2. Turn the key on. 3. Flash the headlights five times. 4. Tap the brake three times. 5. Wait about five to ten seconds. 6. Look over on the right side of the dash, and the battery light will flash flash flash. 7. For vehicles with push-button start, press the start button (vehicle does not need to be running), flash the high beams five times, and tap the brake three times. 8. Wait five to ten seconds, and the battery light will flash flash flash. By following these steps, you can reset the battery monitor sensor.
Do these steps also work for F-150s and super duties that have the battery monitor system?
Yes, the same steps can be used to reset the battery monitor system on F-150s and super duties. However, on some occasions, additional steps may be needed, such as flashing or turning the key on brights five times, tapping the brake three times, turning the key off and back on, depending on the specific vehicle model. But generally, the same reset process applies to all four vehicles.
Can these steps be used for newer Ford vehicles like the Mavericks or the newer Escapes?
While the steps have been successful for 2013-2019 Ford Escapes, it’s recommended to test the same procedure on newer vehicles like the Mavericks or the newer Escapes. It is anticipated that the reset process will work for these vehicles as well.