If you’ve been experiencing hard shifting in your Ford Edge, it doesn’t necessarily mean there’s a major issue with your transmission. In fact, it could be something as simple as a sticking solenoid. In this post, we’ll show you how to identify and fix this common problem without breaking the bank.
So, what causes hard shifting in a transmission? If your transmission slips or shifts noticeably hard, it could be due to a sticking solenoid. Solenoids inside the transmission are activated by different voltages and resistances, and if one of them is sticking, it can cause delayed responses and lead to hard shifting or slipping.
Another potential cause is worn-out transmission fluid. Over time, transmission fluid can degrade and lose its effectiveness, leading to foaming and other issues that affect smooth shifting. In some cases, a simple fluid change can make a big difference.
Now, let’s talk about the solution. Lucas Transmission Fix is a highly effective additive that can help with sticking valves, proper shifting, and preventing slipping. It cleans and lubricates to create a film on bands, stopping slipping. Plus, it works for both automatic and manual transmissions, making it a versatile solution for various vehicles.
We recommend adding Lucas Transmission Fix to your existing fluid with the engine warm and idling. It’s a simple and cost-effective way to potentially solve your hard shifting issues without a major overhaul of your transmission system.
After adding the additive, you should drive the vehicle for at least a couple of hundred miles to let the product take effect. In the case of the Ford Edge mentioned in the video, after driving it for around 280 miles, the hard shifting issues had significantly improved. The transmission was shifting smoothly, indicating that the Lucas additive had made a positive impact.
However, keep in mind that while the additive can address certain issues temporarily, it’s essential to consider a complete transmission fluid change to ensure long-term smooth operation. Adding a bit of Lucas Transmission Fix to the new fluid during the service can also help maintain optimal transmission performance.
Ultimately, addressing hard shifting in your Ford Edge may be as simple as using an additive like Lucas Transmission Fix and considering a fluid change. These steps can potentially save you from costly transmission repairs and keep your vehicle running smoothly for miles to come.
Thank you for reading! Stay tuned for more useful tips and automotive insights. If you found this information helpful, feel free to subscribe to our blog for future updates.
Tags: Ford Edge, transmission issues, hard shifting, Lucas Transmission Fix, transmission additive, vehicle maintenance
What causes hard shifting in a transmission?
Hard shifting in a transmission can be caused by a sticking solenoid or worn out fluid. If the transmission shifts fine most of the time but occasionally shifts hard, it is likely a solenoid issue or worn out fluid causing the problem.
How do solenoids affect transmission shifting?
Solenoids in the transmission are activated by different voltage and resistance levels, causing them to open and close to control the flow of transmission fluid. If a solenoid is sticking, it may delay the response, leading to harder shifts or slipping.
What additive can fix hard shifting in a transmission?
Using an additive like Lucas Transmission Fix can help clean and lubricate sticking valves in the transmission, creating proper shifting and stopping slipping. Adding it to warm, idling engine can improve shifting. It is also recommended for vehicles towing heavy loads or working hard.
How long does it take for the additive to improve shifting?
After adding the Lucas Transmission Fix additive and driving for about 280 miles, the shifting improved significantly. While some improvement was noticed in the first 200 miles, it was after driving the next 80 miles that the shifting became super smooth and problem-free.