If you own a Ford Maverick and it’s time for an oil change, you’re in the right place. In this guide, we’ll walk you through the steps to perform an oil change on your Ford Maverick. Let’s get started!
Step 1: Remove the Skid Plate
Use a t30 torx bit to remove the screws holding the skid plate in place. Once removed, pull away the skid plate and set it aside.
Step 2: Drain the Old Oil
Using a 15-millimeter wrench, remove the oil drain plug and drain out the old oil.
Step 3: Replace the Oil Filter
Using a filter wrench, loosen the filter, unscrew it, and remove it to drain the remaining oil. Screw in your fl400s filter replacement and replace the oil plug.
Step 4: Refill the Oil
Refill your Maverick’s oil using your panda motorworks oil change kit. With the fl400s oil filter, it ups your oil capacity to 5.9 quarts. Be sure to check your oil levels before replacing the cap.
Step 5: Reset the Oil Change Reminder
Navigate to the settings page, click ok on the information tab, click ok on the oil life tab, and then click and hold ok to reset the oil light on the odometer.
With these steps completed, your Ford Maverick should be ready to hit the road with fresh oil. Performing an oil change at home not only saves you money but also gives you the satisfaction of maintaining your vehicle on your own.
Conclusion
We hope this guide has been helpful in guiding you through the oil change process for your Ford Maverick. If you have any questions or additional tips, feel free to leave a comment. Don’t forget to subscribe for more automotive content!
What tools are needed for performing an oil change on a Ford Maverick?
You will need a t30 torx bit, a 15-millimeter wrench, and a filter wrench.
What type of oil filter replacement is recommended?
The recommended oil filter replacement is the fl400s filter.
How much oil capacity does the panda motorworks oil change kit provide for the Ford Maverick?
The panda motorworks oil change kit ups the oil capacity to 5.9 quarts.
How to reset the oil change reminder on the Ford Maverick?
To reset the oil change reminder, navigate to the settings page, click ok on the information tab, click ok on the oil life tab, and then click and hold ok to reset the oil light.
Where can I purchase the panda motorworks oil change kit?
You can purchase the oil change kit from the link provided in the video description.