If you’ve ever wondered how to remove the rear bench in a Tesla Model 3, you’re in luck. A YouTube commenter requested a video tutorial on this, so let’s walk through the process step by step.
The first step is to release the two latches that hold the bench in place. These latches are located along the bottom edge of the seat. On the driver’s side, pull one latch towards yourself and lift up on the seat. On the passenger side, push the latch away from yourself to release the seat.
Once both latches are released, carefully angle the seat and pull it out to reveal the connectors located at the rear corner of the bench. There are connectors on both sides, and it’s crucial to disconnect these before removing the seat to avoid damaging any wires.
After releasing the connectors, the seat can be lifted out and removed. It’s important to note the location of certain components, such as styrofoam blocks covering high voltage and 12-volt system connections under the bench.
When reinstalling the seat, threading the seat belts through the holes in the seat can be the trickiest part. Otherwise, it’s a straightforward process of securing the latches and making sure everything is situated correctly.
If your Model 3 has the second-generation rear bench, removing it allows for completely flat folding of the rear seats, transforming the car’s interior sound. It’s a worthwile experience to try at least once.
Feel free to ask any questions about the process in the comments section. Happy bench removing!
How do I remove the rear bench in a Tesla Model 3?
The first step in removing the model three’s bench is releasing the two latches that hold it in place. Then, carefully angle the seat and pull it out to reveal the connectors. There are two connectors located at the rear corner of the bench, and you need to unplug them before removing the seat to avoid damaging the wires. Both connectors have a locking mechanism that needs to be released before disconnecting the seat from the car’s wiring harness. Once the connectors are undone, lift the seat out and remove it. When reinstalling the seat, ensure to fish the seat belts through the holes and get everything situated properly. If your Model 3 has the second-generation rear bench, removing it will allow you to fold the rear seats completely flat, transforming the car’s interior sound.
What should I be careful of when removing the rear bench in a Tesla Model 3?
While removing the rear bench, be cautious of the connectors located at the rear corner of the bench. Unplug these connectors before attempting to remove the seat to prevent damage to the wires. Additionally, note the presence of high-voltage connections and 12-volt system connections covered by styrofoam blocks in the corners.
Is there a specific way to reinstall the rear bench in a Tesla Model 3?
When reinstalling the rear bench in a Tesla Model 3, ensure to fish the seat belts through the holes in the seat and position everything properly. For Model 3s with the second-generation rear bench, reinstalling the bench allows the rear seats to fold completely flat, unlike the slight angle presented with the second-generation bench in place.
What are the benefits of removing the rear bench in a Tesla Model 3?
Removing the rear bench in a Tesla Model 3 can significantly transform the car’s interior sound. Additionally, for Model 3s with the second-generation rear bench, a completely flat fold for the rear seats is enabled, whereas the seat backs end up at a slight angle when folded down with the second-generation bench in place.