Are you looking to remove the front bumper on your Jeep Grand Cherokee? In today’s episode of LJ’s Garage, we will walk through the step-by-step process to help you get the job done. Stay tuned for some quick tips to make this process a breeze.
To begin, you’ll need a flathead or a trim removal tool, a drill, a 10mm socket, and your hands to remove the plugs.
Step 1: Remove the Underneath Clips
Start by removing the twist tabs located underneath the bumper. Usually, there are six or seven of them. Use the flathead or trim removal tool to easily twist and pop them out.
Next, remove the bolts and rivets behind the fender liners to release the bumper.
Step 2: Disconnect the Fog Lights
Rotate the wheel to access the 10mm bolt and remove two rivets. Remember to disconnect the fog lights by locating the plug inside the fender.
Step 3: Release the Bumper
Remove the remaining push pins from the top corners of the bumper using a flathead or trim removal tool.
Once the push pins are removed, gently pull the bumper towards you to release it from the clips. Be mindful of the fog lights and fender flares during this step.
Step 4: Reinstallation and Tips
When reinstalling the bumper, ensure the alignment is correct, and all the clips are securely in place. Take advantage of the reference points such as the headlights to guide the placement.
Consider purchasing extra clips and a set of trim removal tools to facilitate the process. These tools can be conveniently sourced from an auto store or online marketplaces like Amazon.
By following these steps, you can successfully remove and reinstall the front bumper on your Jeep Grand Cherokee.
For a visual guide and additional tips, check out the entire process in the video above. If you found this guide helpful, consider giving it a thumbs up and subscribe for more automotive tutorials.
What tools are needed to remove the front bumper on a Jeep Grand Cherokee?
All you need is a flathead or a trim removal tool, a drill (possibly), a 10mm socket, and your hands to remove the plugs.
What are the steps to remove the front bumper?
1. Start by removing the twist tabs along the underneath of the bumper. 2. Rotate the wheel to access the 10mm bolt and rivets behind the fender liners. 3. Disconnect the fog light plug located behind the fender liner. 4. Remove the additional hidden screw tabs inside the fender. 5. Remove the push pins from the top of the bumper. 6. Gently pull the bumper to release the clips and carefully maneuver it out.
How to reattach the front bumper?
Ensure the corners are aligned and use the headlights as guiding markers. Push the clips back into place and make sure the fog lights are not obstructed during reattachment.