Welcome to the tutorial on how to replace the battery in a Jeep Wrangler remote key fob. The process is simple and requires only a few tools.
First, you will need a replacement CR2450 battery. You can find a link to purchase these batteries in the video description if needed. Additionally, you will need a small flathead screwdriver to assist with the battery replacement.
To begin, flip the key fob over to access the back. Near the key ring, you will notice a small slot. Insert the screwdriver into the slot and gently pry up on the back cover. Carefully work your way around to remove the cover. Once loosened, use your fingers to remove the cover entirely.
Next, locate another slot near the battery with an icon of a screwdriver. Insert the screwdriver into the slot to carefully remove the old battery from the fob.
Now, take the new CR2450 battery, ensuring that the plus side is facing up. Tuck the edge of the battery into place and then firmly snap it down. After the new battery is secured, reattach the back cover of the key fob.
And that’s it! Your Jeep Wrangler remote key fob should now have a new battery. If you have any questions, feel free to ask. Your support by liking and subscribing would be greatly appreciated. Thank you for watching!
What kind of replacement battery does the Jeep Wrangler remote key fob use?
The Jeep Wrangler remote key fob uses a replacement battery CR2450.
What tools are needed to replace the battery in the Jeep Wrangler remote key fob?
You will need a small flathead screwdriver to replace the battery in the Jeep Wrangler remote key fob.
How can the back cover of the Jeep Wrangler remote key fob be removed?
To remove the back cover of the Jeep Wrangler remote key fob, use a small flathead screwdriver to pry it up from the slot near the key ring at the bottom.
How can the old battery be removed from the Jeep Wrangler remote key fob?
Use a screwdriver to get under the edge of the old battery and remove it from the slot.
How can the new battery be installed in the Jeep Wrangler remote key fob?
Make sure the new battery is installed with the plus side up, tuck the edge in first, then snap it into place.
What should be done after installing the new battery in the Jeep Wrangler remote key fob?
After installing the new battery, snap the back cover back on to complete the process.
How can viewers support the channel?
If you have any questions, please let the channel know. Liking and subscribing to the channel helps them out and is appreciated.