If you’ve been getting a sign on your dashboard indicating that your Nissan key fob battery is getting low, or if your key fob has stopped working, this video will guide you through the process of replacing the battery. Here are the steps to do it:
- Pull out the emergency key from the left-hand side of the key fob by using the provided notch.
- Use a flathead screwdriver to pry open the top slits of the key fob where the key was inserted, in order to open the fob casing.
- Once the casing is open, locate the battery. It is a Panasonic CR2032 3V battery, and the product link is available in the video description for your convenience.
- Dislodge the old battery by using a small screwdriver to pop it out from the groove on the right-hand side.
- Pay attention to how the old battery is positioned with the writing facing downwards, and make sure to position the new battery the same way.
- Slide the new battery towards the spring on the left-hand side until it clicks into place.
- Carefully close the fob casing and ensure it clicks back into place securely.
- Slide the emergency key back into the fob.
- If you’ve ever experienced your Nissan’s steering wheel locking up when trying to start the car, there could be a brake switch issue. Check out our other video on how to fix this problem easily.
With these simple steps, you can easily replace the battery in your Nissan key fob and keep it functioning smoothly. Good luck!
How do I replace the battery in a Nissan key fob?
To replace the battery in a Nissan key fob, follow these steps: 1. Pull the emergency key out by pulling the notch on the left-hand side. 2. Use a flathead screwdriver to pry open the slits at the top of the key and peel it open to reveal the battery. 3. Use a small screwdriver to dislodge the battery from the right-hand side and replace it with a Panasonic cr2032 3v battery. 4. Slide the new battery towards the spring on the left-hand side until it clicks into place. 5. Put the key back together and slide it back in.