Nissan Pathfinder Key Fob Battery: Detailed Replacement Guide

In this tutorial, I will guide you through the process of replacing the battery in a Nissan Pathfinder key fob. The only tools you will need for this task are a small-sized flathead screwdriver and a CR2032 battery.

If you don’t have a CR2032 battery, you can easily find one online. Check out the first link in the description to purchase the battery on Amazon for just a few dollars.

It’s important to note that there are different versions of the Nissan Pathfinder key fob, such as the five-button and four-button options, as well as six and three-button variations. Despite the button configuration, the process of opening the key fob and replacing the battery remains the same for all versions.

To begin, flip over your key fob and locate the latch on the back. Hold it down while removing the internal key. Then, identify the indentation at the bottom of the device and insert the flathead screwdriver into that area. Gently push and twist the screwdriver until you hear a click and the device starts to open. Continue twisting and working your way down until you can separate the two halves of the key fob with your fingers.

Next, use the flathead screwdriver to carefully lift the old battery out of its place. When inserting the new CR2032 battery, ensure that the positive side with the text is facing down. Press the battery into place until it snaps in, with the positive side facing down. Lastly, reassemble the two halves of the key fob and squeeze them together.

If you found this tutorial helpful, feel free to show your support by dropping a like or leaving a comment. If you encounter issues with any of your key fobs in the future, stay tuned for more tutorials on this channel. Additionally, you can visit our website for more information.

What do I need to replace the battery in a Nissan Pathfinder key fob?

You will need a small sized flathead screwdriver and one CR2032 battery.

Where can I find a CR2032 battery?

You can find CR2032 batteries on Amazon.

How do I replace the battery in the key fob?

1. Flip the device over and find the latch on the back. Hold it down while pulling out the internal key. 2. Use a flathead screwdriver to push down and twist in the indentation on the bottom of the device to open it. 3. Gently lift the old battery with the screwdriver and replace it with the positive side of the new CR2032 battery facing down. 4. Snap the new battery in place and reassemble the key fob.

Where can I find more help with key fobs?

You can find more tutorials on key fobs on the channel’s website at

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top