Are you experiencing a P1259 VTEC malfunction code in your Honda Civic or Accord? In this article, we’ll discuss some steps to troubleshoot and potentially fix this issue.
First and foremost, it’s crucial to check your oil level. Ensure that the engine has the proper amount of oil as an insufficient oil level can trigger the malfunction code. If the oil level is low, consider changing the oil and refilling it to the recommended level.
If addressing the oil level doesn’t resolve the problem, the next step may involve replacing the VTEC solenoid. This component is typically situated at the back of the engine, often near the EGR valve. It’s advisable to replace the entire unit rather than just the top part. While accessing the solenoid may be challenging due to its location, removing the EGR valve can make the task more manageable.
When replacing the VTEC solenoid, using a quarter-inch socket set with a 10-millimeter socket and various extensions is recommended due to the confined space. Be prepared for tight bolts, particularly the bottom one, and exercise patience during the replacement process.
It’s important to note that the appearance of the VTEC solenoid may vary in newer models, so it’s essential to identify the specific component relevant to your vehicle. By following these steps, you may be able to resolve the P1259 VTEC malfunction code in your Honda, ultimately extinguishing that pesky warning light.
What should I do if I get a P1259 VTEC malfunction code on my Honda Civic or Accord?
Start by checking the oil level in your engine, as low oil level can trigger this malfunction code. If the oil level is low, consider changing the oil. If that doesn’t resolve the issue, you may need to swap out the VTEC solenoid located on the back of the engine, near the EGR valve. It’s recommended to replace the whole unit rather than just the top part. Accessing the bolts may be challenging, so removing the EGR valve can make it easier. Use a quarter-inch socket set and 10-millimeter extensions to swap out the solenoid. This should help fix the P1259 VTEC malfunction code.
Where is the VTEC solenoid located in Honda Civics and Accords?
The VTEC solenoid is located on the back of the engine, near the EGR valve, towards the passenger side firewall.
What tools do I need to replace the VTEC solenoid?
To replace the VTEC solenoid, you will need a quarter-inch socket set, 10-millimeter socket, various extensions, and a 10-millimeter socket. Removing the EGR valve may make it easier to access the solenoid.