If you own a 2015-2020 Ford F-150 and need to change the tail light bulbs, this step-by-step guide will walk you through the process. It’s important to note that while the specific instructions are for a 2016 F-150 XLT, the procedures will be similar for other trucks within this range.
Before starting the process, ensure you have the necessary supplies and are comfortable performing the task. If not, consider seeking assistance from a professional technician.
Procedure
- Park your truck on a level surface and lower the tailgate.
- Locate the two 5/16 bolts on the inside of the tail light assembly and remove them using a ratchet and socket.
- After removing the bolts, pull the assembly straight back towards the rear of the truck to disengage the plastic tabs holding it in place.
- Turn both bulb sockets counterclockwise to remove them from the assembly and set the assembly aside.
- Gently remove the bulb that needs to be replaced from its socket and install the new bulb in the socket.
- Lift the assembly back into position and secure the sockets by turning them clockwise back into place.
- Align the tabs of the assembly and press it firmly towards the front of the truck.
- Reinstall the two bolts with your ratchet and socket.
- Close the tailgate, and you’re done!
You can find all the supplies needed for this task at your local O’Reilly Auto Parts store or OReillyAuto.com. Their DIY videos are created to address common questions and provide helpful guidance for automotive tasks.
By following these simple steps, you can efficiently replace the tail light bulbs on your Ford F-150 without any hassle. Remember to refer to the specific requirements for your truck and ensure you have the right tools for the job. With this guide, you can keep your vehicle’s tail lights in optimal condition.
What supplies do I need to change the tail light bulbs on a 2015 to 2020 Ford F-150?
You will need a ratchet, socket, and new tail light bulbs.
What are the steps to change the tail light bulbs on a 2015 to 2020 Ford F-150?
1. Park on a level surface and lower the tailgate.2. Remove the two 5/16 bolts on the inside of the tail light assembly using a ratchet and socket.3. Pull the assembly straight back toward the rear of the truck to disengage the plastic tabs holding it in place.4. Turn both bulb sockets counterclockwise to remove them from the assembly and set the assembly aside.5. Gently change the bulb in its socket.6. Install the new bulb in the socket.7. Lift the assembly back into position and secure the sockets by turning them clockwise back into place.8. Align the tabs of the assembly and press it firmly toward the front of the truck.9. Reinstall the two bolts with the ratchet and socket.10. Close the tailgate.
Where can I find the supplies for changing the tail light bulbs?
All the supplies needed for this and other jobs are available at your local O’Reilly Auto Parts store or OReillyAuto.com.
Is there professional help available for changing the tail light bulbs?
If you’re not comfortable doing this yourself, professional technicians can be recommended by O’Reilly Auto Parts.
Where can I find more DIY videos like this one?
Subscribe to the O’Reilly Auto Parts channel to get all the latest DIY videos.