Toyota Camry Key Battery Replacement: Your Ultimate Guide

If you’re driving a Toyota Camry from 2020 to 2023 and need to change the battery for your car key fob, we’ve got you covered. Follow these simple steps to replace the battery and ensure your key fob continues to function without any issues.

To start, you’ll need to access the key inside your remote car key fob. Use the provided latch to pull out the key, commonly referred to as the glovebox key. Once you have the key in hand, locate the small gap where you’ll need to insert a small tool or screwdriver to open the key fob.

Insert the tool into the designated hole and twist it at the right angle to open the fob. Be mindful of the small gap as you insert the tool and apply gentle pressure to twist and release the cover. Once the fob is open, carefully remove the old battery.

The Toyota Camry key fob uses a Panasonic CR2032 3-volt battery. Ensure you have a replacement battery of the same type before proceeding. Insert the new battery into the designated slot, ensuring it fits snugly. Once the new battery is in place, carefully put the cover back on the fob and align it properly before applying pressure to secure it.

After securing the cover, reinsert the key and ensure everything is in place. When you press the buttons on the key fob, you should see the light flash, indicating that the battery replacement was successful.

That’s all it takes to change the battery for your Toyota Camry car key fob. By following these easy steps, you can ensure that your key fob remains functional, allowing you to access and operate your vehicle without any inconvenience.

Thank you for watching this video. For more automotive tips and tutorials, subscribe to our channel.

How do I change the battery for the Toyota Camry 2020-2023?

To change the battery for the Toyota Camry car key fob, follow these steps: 1. Use the glovebox key to open the key fob by inserting it into the designated hole and twisting it to open the fob. 2. Remove the old battery by prying it out with a small tool or screwdriver. 3. Obtain a Panasonic CR2032 3-volt battery to replace the old one. 4. Insert the new battery into the remote control and push it in securely. 5. Put the cover back on and ensure it is properly secured. 6. Test the key fob by pressing the button to see if the light flashes. Remember to subscribe for more helpful videos!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top