If you drive a Toyota hybrid, knowing how to service the coolant is essential. In this tutorial, we will focus on both the inverter coolant and the engine coolant for a 2010 Prius, although the information shared is applicable to all models.
Before getting into the specifics, it’s important to locate the engine coolant reservoir and the inverter coolant reservoir in your car. Most models will have a typical radiator cap for the engine coolant and a separate bottle for the inverter coolant, making it relatively easy to distinguish between the two. Starting the coolant service on a cold engine is essential to avoid any accidents or burns.
Removing any covers at the bottom of the car will expose the radiator and the transmission, where the drains are located. As the process begins, it’s essential to be prepared for some spillage. Using the right tools and equipment, such as a spill-free funnel, can significantly aid in this coolant servicing process. Additionally, using original coolant is highly recommended, as it ensures the best performance for your hybrid vehicle.
Putting your Toyota hybrid in maintenance mode is a crucial step before starting the coolant service. This mode allows the engine to run continuously, aiding in the bleeding and filling process. However, it’s important to note that driving the car in maintenance mode for an extended period can cause damage to the hybrid system, hence such action should be avoided.
Once the coolant has been filled and the car has been in maintenance mode, it’s important to monitor the coolant levels and the functioning of cooling fans. Topping off the coolants as needed and securely closing all the caps is the final step. It’s recommended to take the car for a short drive and recheck the coolant levels to ensure everything is functioning as it should.
This simple and informative DIY tutorial emphasizes the importance of regular coolant servicing for your Toyota hybrid. By following these steps, you can ensure the optimal performance and longevity of your vehicle without having to rely on professional assistance for this particular task.
What is the video about?
The video is a tutorial on how to service the coolant on a Toyota hybrid, covering both the inverter coolant and the engine coolant.
What model is used in the video?
The specific model used in the video is a 2010 Prius, but the information provided applies to all models of Toyota hybrids.
What tools and equipment are needed?
Tools and equipment needed include drain pan, 10mm hex wrench, original Toyota coolant, spill-free funnel, and maintenance mode instructions for Toyota hybrid models.
Is it recommended to use original coolant?
Yes, it is recommended to always use original Toyota coolant.
What precautions should be taken while working on the hybrid system?
It is advised not to drive the car in maintenance mode, as the engine will run continuously. Additionally, it is important to turn off the heater and ensure proper ventilation when working with the coolant.
How to exit maintenance mode?
To exit maintenance mode, simply shut off the car, and it will automatically return to normal mode.