Replacing the cabin air filter in your vehicle is an important maintenance task that ensures clean air circulation inside the car. Follow these step-by-step instructions to replace the cabin air filter in your vehicle and enjoy fresh, clean air during your drives.
To begin, open the glovebox in your vehicle to access the cabin air filter.
- Locate the cabin filter, which is situated on the passenger side of the vehicle.
- Open the glovebox in your car to access the filter.
- Pull the shelves of the tabs so they pop out of their catch.
- Remove the dampener cord from the glovebox.
- Push in on both sides of the glovebox to release the stops.
- Unclip both sides of the housing cover to remove it.
- Remove the old filter from the housing and clean out any debris inside the housing.
- Install your new AQ1189 filter with its airflow indicating arrow pointing down.
- Reinstall the filter housing door.
- Reinstall the glovebox assembly, while pulling the dampener cord down.
- Partially close the glovebox to re-engage the stoppers and then reinstall the dampening cord.
- Clip the shelf back into the glovebox.
- Close the glovebox.
By following these steps, you can easily replace the cabin air filter in your vehicle. Breathe in fresh, clean air during your journeys by ensuring that your cabin air filter is clean and functioning optimally.
Get your replacement parts today at Filterheads.com to maintain clean air inside your vehicle.
Where is the cabin filter located?
The cabin filter is located on the passenger side of the vehicle.
How do I replace the cabin filter?
To replace the cabin filter, follow these steps: 1. Open the glovebox. 2. Pull the shelves of the tabs to release them. 3. Remove the dampener cord from the glovebox. 4. Push in on both sides of the glovebox to release the stops. 5. Unclip both sides of the housing cover to remove it. 6. Remove the old filter from the housing and clean out any debris inside. 7. Install your new filter with its airflow indicating arrow pointing down. 8. Reinstall the filter housing door. 9. Reinstall the glovebox assembly, partially close the glovebox to re-engage the stoppers, and then reinstall the dampening cord. 10. Clip the shelf back into the glovebox and close it.
Where can I order the parts?
You can order the parts at Filterheads.com.
How can I stay updated on new content?
Like the video and subscribe to the channel to stay updated on new content.