If you own a 2013 Ford Fusion with a turbo but can’t seem to find the transmission fluid dipstick, fret not. Here’s a guide on how to change the transmission fluid without the dipstick.
To locate the transmission fluid plug, start by locating the airbox and then move down beside it. You’ll find the plug near the air hose, a bit tricky to spot, but it’s there. The transmission fluid required for your vehicle is the merkon LV.
Since there’s no dipstick to check the fluid level, you can find the transmission fluid drain and the overflow plug under the car. It’s important to ensure the vehicle is as level as possible when carrying out this procedure.
Once drained and refilled, start the engine with the emergency brake on and run it through all the gears. Then, top up the transmission fluid if necessary.
Following these steps, you can successfully change the transmission fluid in your 2013 Ford Fusion Turbo. Happy maintenance!
Thank you for reading!
Where is the transmission fluid plug located in a 2013 Ford Fusion with turbo?
The transmission fluid plug is located right beside the airbox, down below the air hose. It may be a little difficult to see, but it is positioned inside and can be accessed by moving the hose.
What type of transmission fluid is recommended for the 2013 Ford Fusion with turbo?
The recommended transmission fluid is merkon LV.
How can you check the transmission fluid level without a dipstick?
To check the transmission fluid level, locate the transmission fluid drain and ensure the vehicle is as level as possible. The overflow plug is located near the front tire, behind the axle and CV joint. After draining and refilling, start the engine with the emergency brake on, run it through all gears, then top up as necessary.