Is your car’s cabin starting to smell a little off? It might be time to replace your cabin filter. Fortunately, with the help of Filterheads.com, swapping out your old filter for a new one is a simple task that you can easily do yourself. Let’s take a look at how to do it.
The cabin filter is typically located behind the glovebox, so the first step is to access this area. Open the glovebox and unhook the dampener arm. Then, push in on the sides of the glovebox to release the stops and lower it down. With the glovebox out of the way, you can proceed to remove the rubber shelf by pulling upwards.
Next, you’ll need a seven-millimeter socket to remove the two screws securing the glovebox assembly. Carefully pull out the upper panel, making sure not to damage any connected wires. Once the upper panel is removed, unclip both sides of the housing cover to take it off.
Now that you have access to the housing, take out the old filter and clean out any debris inside. Then, it’s time to install the new filter. Make sure to orient it properly with its airflow indicating arrow pointing down. It’s recommended to replace the cabin filter every 15,000 miles or once a year, but it’s always good to refer to your vehicle’s owner’s manual for specific recommendations.
After placing the new filter in the housing, reattach the filter housing door and the upper panel. Secure everything back in place by reinstalling the screws. Don’t forget to lift the glovebox back into position, making sure the securing tabs are properly behind the frame. Reattach the dampener arm and put the rubber shelf back in place by aligning the tabs with their catch and pressing to lock them into place. Finally, close the glovebox, and you’re all done!
When it’s time to get your new cabin filter, head over to Filterheads.com to order the right filter for your car model. With the easy installation process, you can keep your car smelling fresh and clean in no time!
Where is the cabin filter located?
The cabin filter is located behind the glovebox and will require uninstalling the glovebox to gain access.
How do I replace the cabin filter?
1. Open the glovebox. 2. Unhook the dampener arm. 3. Push in on the sides of the glovebox to release the stops and lower the glovebox. 4. Remove the rubber shelf by pulling upwards. 5. Use a seven millimeter socket and remove the two screws securing the glovebox assembly. 6. Pull to remove the upper panel carefully as to not damage the connected wires. 7. Unclip both sides of the housing cover to remove it. 8. Remove the old filter from the housing and clean out any debris inside. 9. Install your new filter into the housing with its airflow indicating arrow pointing down. 10. Recommended replacement every 15,000 miles or one year. Refer to your vehicle owner’s manual for specifications. 11. Reinstall the filter housing door. 12. Reinstall the upper panel. 13. Reinstall the screws. 14. After lifting the glovebox, push in on the sides to get the two securing tabs behind the frame. This will secure the glovebox. 15. Reinstall the dampener arm. 16. Reinstall the rubber shelf by aligning the tabs with their catch and then pressing to lock them into place. 17. Close the glovebox.
Where can I order a new cabin filter?
You can order your filter from Filterheads.com to ensure that it fits.