If you’re looking to replace the battery in your Ford Escape, it’s important to know the specific steps involved. While it may seem straightforward, there are some extra precautions you need to take to ensure a safe and successful battery replacement.
Before you begin, always check the original equipment manufacturer’s step-by-step instructions to make sure you have everything you need. Safety should be a priority throughout the process.
Here’s a detailed guide on how to replace the battery in your Ford Escape:
- Put on gloves and safety glasses.
- Disconnect the negative battery cable from the firewall using a 13mm wrench.
- Isolate the negative battery cable end to prevent it from contacting any metal.
- Remove the battery cover and the air cleaner cover.
- Take out the air cleaner and the lower air box assembly.
- Remove the wire loom grommets and move the wiring out of the way.
- Disconnect the positive battery cable using a 10mm socket.
- Bring the front of the battery box down and remove the battery’s hold-down bracket with a 10mm wrench.
- Slide the battery forward and disconnect the negative battery cable using a 10mm wrench.
- Remove the old battery from the vehicle.
- Install the new battery and clean any corrosion off the battery terminals and cable ends using a wire brush.
- Reinstall the negative battery cable onto the negative battery terminal and retighten the nut to 5 Newton meters.
- Slide the battery all the way back into the battery box, reinstall the hold-down bracket, and tighten the nuts to 8 Newton meters.
- Reinstall the front of the battery box, the positive battery cable, and retighten the nut to 5 Newton meters.
- Reposition the wiring harness.
- Reinstall the lower air cleaner assembly and the air filter.
- Tighten the bolts to 5 Newton meters.
- Reinstall the battery cover and the negative battery cable, then retighten the nut to 23 Newton meters.
Following these steps will ensure a successful replacement of the car battery in your Ford Escape. Always prioritize safety and refer to the manufacturer’s instructions for any specific details related to your vehicle.
What vehicles have their 12-volt start in battery tucked up underneath the windshield wiper cowl?
Some vehicles like the Ford Escape have their 12-volt start in battery tucked up underneath the windshield wiper cowl.
What are the key steps for replacing the battery in a vehicle like Ford Escape?
The key steps for replacing the battery in a vehicle like Ford Escape are: disconnect the negative battery cable, remove the battery cover and air cleaner cover, remove the air cleaner and lower air box assembly, remove the wire loom grommets, move the wiring out of the way, remove the positive battery cable, remove the batteries hold down bracket, detach the negative battery cable, remove the old battery, install the new battery, clean any corrosion off the battery terminals and cable ends, reinstall the negative battery cable, slide the battery back into the battery box, reinstall the hold-down bracket, reinstall the front of the battery box, reinstall the positive battery cable, reposition the wiring harness, reinstall the lower air cleaner assembly, reinstall the air filter and air filter cover, reinstall the battery cover, and reconnect the negative battery cable.
What tools are needed for replacing the battery in a vehicle like Ford Escape?
The tools needed for replacing the battery in a vehicle like Ford Escape are: 13 millimeter wrench, 10 millimeter socket, wire brush, gloves, safety glasses.