Like many other manufacturers, Ford has installed a tire pressure monitoring system in many of their vehicles, including the Ford Fusion. The TPMS keeps track of the air pressure in the car tires and alerts drivers when the pressure drops and they need to top up the air. In order to provide consistently accurate pressure readings, the TPMS will need to be reset. Here’s a step-by-step guide on how to reset the TPMS on a 2007 to 2019 Ford Fusion, and what to do if the TPMS warning light doesn’t go off when reset.
Why Reset TPMS?
Driving with the TPMS warning light on is not advisable as the light indicates a reason for concern. The TPMS warning light resembles a cross-section of a tire with an exclamation mark in the center, and is located in the instrument cluster. Resetting the TPMS is not something you need to do every time you get behind the wheel, but there are a few occasions where drivers need to reset the system in their Ford Fusion. These include after adding air to the tires, changing a tire, or rotating the tires.
How to Reset TPMS on Ford Fusion (2007-2019)
To reset the tire pressure monitoring system in any Ford Fusion model from 2007 to 2019, the process is straightforward and easy. Here’s a step-by-step guide:
- As soon as you see the TPMS warning light, pull over and stop the car.
- The TPMS display in your car will have alerted you to which tires need more air. Inflate the tire or tires to the recommended PSI for your vehicle. This information can be found inside the car door.
- Get back into the car and drive for a few miles at speeds over 20 miles per hour.
- Once you have driven for two minutes at 20 miles per hour or above, the TPMS will have calibrated and be reset.
Occasionally after inflating or changing the tire and trying to reset the TPMS by driving above 20 miles per hour, you may notice the TPMS warning light has not switched off. In these circumstances, the light may still be on because the TPS sensors need to be reset.
Resetting TPMS Sensors
In order to reset the tire pressure monitoring sensors on a Ford Fusion, you will need to purchase a TPMS reset tool. Car owners can easily find a suitable TPMS sensor reset tool for their vehicle on Amazon or speak to a local car dealer for professional guidance. Once you have your reset tool, follow these steps to reset the TPMS sensors:
- Put the key into the ignition and push down on the brake pedal one time, then release.
- Turn the key to the on and then off position three times.
- Leaving the key in the on position, press and release the brake pedal again.
- Turn the key on and off three more times.
- The car will make a beeping sound to indicate it is now in relearn mode.
- Get out of the car and use your TPMS reset tool to reset the sensors.
- Using the TPMS reset tool, start with the driver’s side front tire to relearn the sensors. Follow instructions for your TPMS reset tool to relearn each tire sensor.
- The horn will sound when the sensor has been relearned, and the process will be complete.
Resetting TPMS Using Reset Button
Some Ford Fusion models come with a TPMS reset button installed, making the process of resetting the tire pressure monitoring system easier than ever. Here’s a step-by-step guide:
- Put the key in the ignition and turn it to the on position.
- Press down the reset button, which can usually be found under the dash or to the side of the steering wheel. Check your owner’s manual if you are unsure.
- Hold the button down until the TPMS light blinks several times.
- You can now fully turn the key in the ignition and start the engine.
- Leave the car to run for approximately 20 minutes. The TPMS system should now be reset.
Conclusion
The TPMS in a Ford Fusion ensures drivers know the air pressure of their vehicle’s tires at all times. When the sensors detect low air pressure, a warning light will appear on the dashboard. If the TPMS doesn’t automatically reset after you have inflated the tires, you will need to reset the system. We hope this information helps you successfully reset the TPMS and switch off the warning light in your Ford Fusion!
What is the purpose of the TPMS in a Ford Fusion?
The TPMS (Tire Pressure Monitoring System) in a Ford Fusion keeps track of the air pressure in the car tires and alerts drivers when the pressure is low, indicating the need to top up the air.
How to reset the TPMS in a 2007 to 2019 Ford Fusion?
To reset the TPMS in a 2007 to 2019 Ford Fusion, follow these steps: 1. Pull over as soon as you see the TPMS warning light and stop the car. 2. Inflate the tire or tires to the recommended PSI for your vehicle as indicated inside the car door. 3. Drive for a few miles at speeds over 20 miles per hour. 4. After driving, the TPMS will be recalibrated and reset.
What to do if the TPMS warning light doesn’t turn off after inflating the tires?
If the TPMS warning light doesn’t turn off after inflating the tires, the TPMS sensors may need to be reset. This can be done using a TPMS reset tool following specific steps to relearn each tire sensor and turn off the warning light.
Where is the TPMS reset button located in a Ford Fusion?
The TPMS reset button in a Ford Fusion is usually located under the dash or to the side of the steering wheel, as specified in the owner’s manual for the specific model year.
What is the recommended PSI for Ford Fusion tires?
The recommended PSI for Ford Fusion tires is 32, as specified for the vehicle. This information can also be found on the door panel or in the owner’s manual.